OSHA Inspection: ELECTRICAL INSTRUMENTATION CONTROL SERVICES

Issued

Jan 31, 2024

Abate by

Feb 20, 2024

Penalty

Initial $2,074 · Current $2,074

General-duty citation text

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  Shell Station Canopy Roof: Employees used a Milwaukee rotary hammer drill to drill holes into concrete without any control measures implemented from Table 1-Specified Exposure Control Methods When Working with Materials Containing Crystalline Silica. Employees were exposed to respiratory hazards.

Issued

Jan 31, 2024

Abate by

Feb 27, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  Employees that were required to wear a N95 respirator while drilling concrete were not medically cleared for use. Employees were exposed to respiratory hazards.

Issued

Jan 31, 2024

Abate by

Feb 27, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  Employees that were required to wear a N95 respirator while drilling concrete were not fit tested prior to respirator use. Employees were exposed to respiratory hazards.