POMPANO BEACH, FL —
OSHA Inspection: EDWIN B. STIMPSON COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of EDWIN B. STIMPSON COMPANY, INC. in 1515 SW 13 COURT, POMPANO BEACH, FL 33069 (NAICS 333999). OSHA activity number 347090920.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EDWIN B. STIMPSON COMPANY, INC.
- Site address
- 1515 SW 13 COURT
- City
- POMPANO BEACH
- State
- FL
- ZIP
- 33069
- Mailing
- 1515 SW 13TH COURT, POMPANO BEACH, FL 33069
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333999
- Employees
- 185
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.217 D01 I
- Issued
- Apr 29, 2024
- Abate by
- Jun 14, 2024
- Penalty
- Initial $14,518 · Current $8,711 Reduced
General-duty citation text
29 CFR 1910.217(d)(1)(i): The employer did not use dies and operating method(s) designed to control or eliminate hazards to operating personnel on mechanical power press(es): On or about November 8, 2023, and at times prior to, at 1515 SW 13th Cou1t Pompano Beach, FL, the employer did not ensure the use of methods designed to control or eliminate point of operation hazards during production set-up/adjustment in jog mode, while employees who use the Bruderer 3896 mechanical power press Label 3896, Serial No R02654, Type BSTA 3011 HL, 460V, 60 cycles were exposed to crush by and amputation hazards a) On or about November 8, 2023, and at times prior to, at 1515 SW 13th Court Pompano Beach, FL, the employer did not ensure the use of methods designed to control or eliminate point of operation hazards during production set-up/adjustment in jog mode, while employees who use the Bruderer 3896 mechanical power press Label 3896, Serial No R02654, Type BSTA 3011 HL, 460V, 60 cycles were exposed to crush by and amputation hazards, in that
Recent events (2)
- — I (S) $8710.8
- — Z (S) $14518
1910.217 D01 II
- Issued
- Apr 29, 2024
- Abate by
- Jun 14, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(d)(1)(ii): Hand tool(s) were not used for freeing and removing stuck work or scrap pieces from the die(s) of mechanical power press(es) so that no employee needed to reach into the point of operation for such purposes: a) On or about November 8, 2023, and at times prior to, at 1515 SW 13th Court Pompano Beach, FL, employees were exposed to amputation hazards, in that the employer did not ensure that operators of the Bruderer 3896 mechanical power press Label 3896, Serial No R02654, Type BSTA 3011 HL, 460V, 60 cycles were using hand tools for freeing and removing stuck work or scrap pieces from the die(s) during production set-up/adjustments in jog mode to prevent accidental contact with the point of operation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 F02
- Issued
- Apr 29, 2024
- Abate by
- Jun 14, 2024
- Penalty
- Initial $14,518 · Current $8,711 Reduced
General-duty citation text
29 CFR 1910.217(f)(2): Operator(s) were not trained and instructed in the safe method of work before starting work on mechanical power press(es): a) On or about November 8, 2023, and at times prior to, at 1515 SW 13th Court Pompano Beach, FL, employees were exposed to amputation hazards, in that the employer did not ensure that operators of the Bruderer 3896 mechanical power press Label 3896, Serial No R02654, Type BSTA 3011 HL, 460V, 60 cycles were trained and instructed in the safe method(s) of work during production set-up/adjustments in jog mode to prevent accidental contact with the point of operation.
Recent events (2)
- — I (S) $8710.8
- — Z (S) $14518
More inspections at Edwin B. Stimpson Company, INC.
View Edwin B. Stimpson Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333999)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347090920.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.