CHICAGO, IL —
OSHA Inspection: NORTH SHORE FRAMING INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of NORTH SHORE FRAMING INC. in 2416 N SAWYER AVE., CHICAGO, IL 60647 (NAICS 238130). OSHA activity number 347165532.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NORTH SHORE FRAMING INC.
- Site address
- 2416 N SAWYER AVE.
- City
- CHICAGO
- State
- IL
- ZIP
- 60647
- Mailing
- 1456 W. FULLERTON AVE., CHICAGO, IL 60614
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 14
- Ownership type
- A
Citations
6 citations on file for this inspection.
1903.19 C01
- Issued
- May 20, 2024
- Abate by
- Jun 7, 2024
- Penalty
- Initial $569 · Current $569
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement due date, that the cited violations had been abated: North Shore Framing Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation 1, Item 1, 1926.501(b)(4)(i) Citation 1, Item 2, 1926.501(b)(14) Citation 3, Item 1, 1926.501(b)(1) Citation 3, Item 2, 1926.1052(c)(1)(ii) In accordance with 29 CFR 1903.(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (O) $569
1926.501 B04 I
- Issued
- Mar 7, 2024
- Abate by
- Mar 26, 2024
- Penalty
- Initial $7,098 · Current $7,098
General-duty citation text
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet above lower levels by personal fall arrest systems, covers, or guardrail systems erected around such holes: a) On or about October 16, 2023, employees were working on the third floor and the roof of a building under construction and were not protected from falling approximately 10 feet through floor holes to the lower level. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $7098
1926.501 B14
- Issued
- Mar 7, 2024
- Abate by
- Mar 26, 2024
- Penalty
- Initial $7,098 · Current $7,098
General-duty citation text
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached) where the outside bottom edge of the wall opening is 6 feet or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches above the walking/working surface, were not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system: a) On or about October 16, 2023 , employees engaged in framing carpentry work were not protected from fall hazards while working around unguarded wall openings on the second and third floors. b) On or about October 16, 2023, employees engaged in framing work around unprotected elevator shafts approximately three stories above the ground, were not protected from the hazard of falling. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $7098
1926.416 A01
- Issued
- Mar 7, 2024
- Abate by
- Mar 26, 2024
- Penalty
- Initial $70,982 · Current $70,982
General-duty citation text
29 CFR 1926.416(a)(1): The employer permitted an employee to work in such proximity to any part of an electric power circuit that the employee could contact the electric power circuit in the course of work and was not protected against electric shock by deenergizing the circuit and grounding it or by guarding it effectively by insulation or other means: a) On or about October 16, 2023, employees performing framing carpentry work to a new structure were permitted to work in proximity to energized overhead powerlines and were not protected against electric shock. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (W) $70982
1926.501 B01
- Issued
- Mar 7, 2024
- Abate by
- Mar 26, 2024
- Penalty
- Initial $35,488 · Current $35,488
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) On or about October 16, 2023, employees engaged in framing work are not protected from fall hazards while working at an elevation of approximately three stories above the ground. North Shore Framing Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(1), which was contained in OSHA inspection number 1656841, citation number 1, item number 1 and was affirmed as a final order on July 12, 2023, with respect to a workplace located at 1708 Oak Ave., Evanston, IL 60201. North Shore Framing Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1613708, citation number 1, item number 2 and was affirmed as a final order on December 28, 2022, with respect to a workplace located at 2140 N Rockwell St., Chicago, IL 60647. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (R) $35488
1926.1052 C01 II
- Issued
- Mar 7, 2024
- Abate by
- Mar 26, 2024
- Penalty
- Initial $25,353 · Current $25,353
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with one stair rail system along each unprotected side or edge: a) On or about October 16, 2023, employees were using a stairway to access the roof from the third story. The stairway that was utilized was not equipped with a stair rail system thereby exposing themselves to falls. North Shore Framing Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.1052(c)(1)(ii), which was contained in OSHA inspection number 1656841, citation number 1, item number 1 and was affirmed as a final order on July 12, 2023, with respect to a workplace located at 1708 Oak Ave., Evanston, IL 60201. North Shore Framing Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.1052(c)(1)(ii), which was contained in OSHA inspection number 1613708, citation number 1, item number 2 and was affirmed as a final order on December 28, 2022, with respect to a workplace located at 2140 N Rockwell St., Chicago, IL 60647. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (R) $25353
More inspections at North Shore Framing INC.
View North Shore Framing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347165532.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.