AMMON, ID —
OSHA Inspection: ABC EXTERIORS, L.L.C.
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of ABC EXTERIORS, L.L.C. in 2746 JUDY STREET, AMMON, ID 83401 (NAICS 238190). OSHA activity number 347174658.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ABC EXTERIORS, L.L.C.
- Site address
- 2746 JUDY STREET
- City
- AMMON
- State
- ID
- ZIP
- 83401
- Mailing
- 224 S. MAIN #227 STE # 15, SPRINGVILLE, UT 84663
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238190
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.1153 C01
- Issued
- Apr 18, 2024
- Abate by
- May 14, 2024
- Penalty
- Initial $7,098 · Current $4,500 Reduced
9000
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assessed and limited the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. a) Building B: On December 15, 2023, and at times prior to; employees cutting Hardie Plank fiber-cement siding, containing 40 percent silica, were using a Makita radial and a DeWalt radial saw with a 7 1/4" HardieBlade, creating visible dust clouds. Neither saw was equipped with a dust collection system. Note* Abatement certification and documentation are required for this item.
Recent events (2)
- — I (S) $4500
- — Z (S) $7098
1926.1153 D02 I
- Issued
- Apr 18, 2024
- Abate by
- May 14, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: a) Building B: On December 15, 2023, and at times prior to; employees cutting Hardie Plank fiber-cement siding, containing 40 percent silica, were using a Makita radial and a DeWalt radial saw with a 7 1/4" HardieBlade, creating visible dust clouds. Neither saw was equipped with a dust collection system. Note* Abatement certification and documentation is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G01
- Issued
- Apr 18, 2024
- Abate by
- May 14, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: a) Building B: On December 15, 2023, and at times prior to; employees cutting Hardie Plank fiber-cement siding, containing 40 percent silica, were using a Makita radial and a DeWalt radial saw with a 7 1/4" HardieBlade, creating visible dust clouds. Neither saw was equipped with a dust collection system. Note* Abatement certification and documentation are required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 I02 I
- Issued
- Apr 18, 2024
- Abate by
- May 14, 2024
- Penalty
- Initial $7,098 · Current $4,500 Reduced
9000
General-duty citation text
29 CFR 1926.1153(i)(2)(i): The employer did not ensure that each covered employee could demonstrate knowledge and understanding of at least the information contained in paragraphs (A) - (F) of this section. a) Building B: On December 15, 2023, and at times prior to; employees cutting Hardie Plank fiber-cement siding, containing 40 percent silica, were using a Makita radial and a DeWalt radial saw with a 7 1/4" HardieBlade, creating visible dust clouds. Neither saw was equipped with a dust collection system. Note* Abatement certification and documentation are required for this item.
Recent events (2)
- — I (S) $4500
- — Z (S) $7098
1926.1153 I02 II
- Issued
- Apr 18, 2024
- Abate by
- May 14, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(i)(2)(ii): The employer did not make a copy of this section, 1926.1153(i)(2) employee information and training, readily available without cost to each employee covered by this section: a) Building B: On December 15, 2023, and at times prior to; employees cutting Hardie Plank fiber-cement siding, containing 40 percent silica, were using a Makita radial and a DeWalt radial saw with a 7 1/4" HardieBlade, creating visible dust clouds. Neither saw was equipped with a dust collection system. Note* Abatement certification and documentation are required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at ABC Exteriors, L.L.C.
View ABC Exteriors, L.L.C.'s full OSHA safety record →
More inspections in this industry (NAICS 238190)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347174658.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.