YORK, PA —
OSHA Inspection: ACCENT METALS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ACCENT METALS, INC. in 3675 SANDHURST DRIVE, YORK, PA 17406 (NAICS 332813). OSHA activity number 347217960.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACCENT METALS, INC.
- Site address
- 3675 SANDHURST DRIVE
- City
- YORK
- State
- PA
- ZIP
- 17406
- Mailing
- 3675 SANDHURST DRIVE, YORK, PA 17406
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- Employees
- 32
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 1, 2024
- Abate by
- Oct 28, 2024
- Penalty
- Initial $12,421 · Current $6,240 Reduced
A100
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees from fire and explosion hazards: a) 3675 Sandhurst Drive, York, PA - The employer did not determine combustible dust hazards of the aluminum material generated during metal polishing operations, as they failed to conduct a Dust Hazard Analysis (DHA), on or about January 18, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $6240
- — Z (S) $12421
1910.307 C
- Issued
- Jul 1, 2024
- Abate by
- Oct 28, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: a.) 3675 Sandhurst Drive, York, PA - Harper Machining Area - On or about February 20, 2024, Class II dust was located in the Harper Machining Area, and electrical equipment in that area, including, but not limited to, electrical disconnects, electrical panels, electrical receptacles, and cord and plug equipment, was not rated for Class II environments. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 A01
- Issued
- Jul 1, 2024
- Abate by
- Oct 28, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces were kept in a clean, orderly, and sanitary condition: a.) 3675 Sandhurst Drive, York, PA - Harper Machining Area - The area where aluminum polishing operations were performed had explosible aluminum dust located on the machinery surfaces and structural support beams, on or about February 20, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 A02
- Issued
- Jul 1, 2024
- Abate by
- Oct 28, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(2): The employer did not ensure that the floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition: a.) 3675 Sandhurst Drive, York, PA - Harper Machining Area - The aluminum polishing operations area had explosible aluminum dust accumulated greater than 1/8th inch in depth on the floors, on or about February 20, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Accent Metals, INC.
View Accent Metals, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347217960.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.