WINCHESTER BAY, OR —
OSHA Inspection: REEDSPORT MACHINE & FABRICATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of REEDSPORT MACHINE & FABRICATION in 170 BAY FRONT LOOP, WINCHESTER BAY, OR 97467 (NAICS 336612). OSHA activity number 347227654.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- REEDSPORT MACHINE & FABRICATION
- Site address
- 170 BAY FRONT LOOP
- City
- WINCHESTER BAY
- State
- OR
- ZIP
- 97467
- Mailing
- P.O. BOX 508, REEDSPORT, OR 97467
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336612
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.242 B
- Issued
- Feb 21, 2024
- Abate by
- Mar 18, 2024
- Penalty
- Initial $1,587 · Current $794 Reduced
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a)170 Bay Front Loop, Winchester Bay, Or. 97467, on or about 23 Jan. 2024 and at times prior thereto: Employees were exposed to serious injuries from unregulated compressed air used for cleaning floors, surfaces, parts, and equipment which exceeded 30 psi. Resulting in potential eye injuries from airborne contaminates.
Recent events (2)
- — I (S) $793.5
- — Z (S) $1587
1915.72 A04
- Issued
- Feb 21, 2024
- Abate by
- Mar 18, 2024
- Penalty
- Initial $1,587 · Current $794 Reduced
General-duty citation text
29 CFR 1915.72(a)(4):Manufactured portable metal ladders provided by the employer did not comply with the provisions of the American National Standards Institute Safety Code for Portable Metal Ladders, A14.1972. (a)170 Bay Front Loop, Winchester Bay, Or. 97467, maintenance workshop building, on or about 23 Jan. 2024 and at times prior thereto: Employees were exposed potential fall distance hazard from 7 portable metal ladders having no marking or labels from the manufacture for weight capacity and safety warnings visible or legible. PORTABLE METAL LADDERS NOT IN ACCORDANCE WITH ANSI A14.2-1972).
Recent events (2)
- — I (S) $793.5
- — Z (S) $1587
1910.212 A01
- Issued
- Feb 21, 2024
- Abate by
- Mar 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1):Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: (a)170 Bay Front Loop, Winchester Bay, Or. 97467, maintenance work shop area, on or about 23 Jan. 2024 and at times prior thereto: Employees were exposed to struck by and caught in hazards such as flying chips and clothing caught in rotating parts as a result of the employer's failure to ensure that the Drill Press was equipped with a guard sufficient to protect the operator from the rotating chuck and flying debris created during operation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.212 B
- Issued
- Feb 21, 2024
- Abate by
- Mar 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: (a)170 Bay Front Loop, Winchester Bay, Or. 97467, on or about 23 Jan. 2024 and at times prior thereto: Employees were exposed potential struck by and crush by hazard from a unanchored drill press and bench grinder that is located in the work shop area.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.215 D03
- Issued
- Feb 21, 2024
- Abate by
- Mar 18, 2024
- Penalty
- Initial $297 · Current $149 Reduced
General-duty citation text
29 CFR 1910.215(d)(3):The contact surface(s) of wheel(s), blotter(s) or flange(s) on grinding machine(s) were not flat and free or foreign matter: (a)170 Bay Front Loop, Winchester Bay, Or. 97467, on or about 23 Jan. 2024 and at times prior thereto: Employees were exposed to a struck by hazard from an uneven grinding wheel face potentially cause wheel to shatter or explode, throwing abrasive wheel fragments toward operator.
Recent events (2)
- — I (O) $148.5
- — Z (O) $297
1910.334 A02 II
- Issued
- Feb 21, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii):There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service: (a)170 Bay Front Loop, Winchester Bay, Or. 97467, travelall lift dock area, on or about 23 Jan. 2024 and at times prior thereto: Employees were exposed to potential electrical shock hazard from a 50 foot extension flexible electrical cord which had a improperly repaired male plug in.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Reedsport Machine & Fabrication
View Reedsport Machine & Fabrication's full OSHA safety record →
More inspections in this industry (NAICS 336612)
More inspections in OR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347227654.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.