MILES CITY, MT —
OSHA Inspection: FRANK'S BODY SHOP
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of FRANK'S BODY SHOP in 405 S HAYNES AVE., MILES CITY, MT 59301 (NAICS 811111). OSHA activity number 347264541.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRANK'S BODY SHOP
- Site address
- 405 S HAYNES AVE.
- City
- MILES CITY
- State
- MT
- ZIP
- 59301
- Mailing
- P.O. BOX 1105, MILES CITY, MT 59301
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 13
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.28 B08 II
- Issued
- May 8, 2024
- Abate by
- Jun 4, 2024
- Penalty
- Initial $3,134 · Current $1,880 Reduced
General-duty citation text
29 CFR 1910.28(b)(8)(ii): For a repair pit, service pit, or assembly pit that was less than 10 feet (3 m) deep, the employer did not apply floor markings at least 6 feet (1.8 m) from the edge of the pit in colors that contrast with the surrounding area; or place a warning line at least 6 feet (1.8 m) from the edge of the pit as well as stanchions that are capable of resisting, without tipping over, a force of at least 16 pounds (71 N) applied horizontally against the stanchion at a height of 30 inches (76 cm); or place a combination of floor markings and warning lines at least 6 feet (1.8 m) from the edge of the pit. a. Shop: On or about February 5, 2024, and at times prior, employees were exposed to fall hazards while walking and working around the open repair pit.
Recent events (2)
- — I (S) $1880.4
- — Z (S) $3134
1910.215 A02
- Issued
- May 8, 2024
- Abate by
- Jun 4, 2024
- Penalty
- Initial $2,350 · Current $1,410 Reduced
General-duty citation text
29 CFR 1910.215(a)(2):Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: Shop: On or about February 5, 2024, and at times prior, employees were exposed to caught in hazards while performing grinding material and tools on unguarded King Bench Grinder.
Recent events (2)
- — I (S) $1410
- — Z (S) $2350
1910.215 A04
- Issued
- May 8, 2024
- Abate by
- Jun 4, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a. Shop: On or about February 5, 2024, and at times prior, employees were exposed to caught in hazards while using the King Bench Grinder to grind materials and tools with work rest setting greater that 1/8 inch from the wheel. b. Shop: On or about February 5, 2024, and at times prior, employees were exposed to caught in hazards while using the Millers Tools Bench Grinder to grind materials and tools with work rest setting greater that 1/8 inch from the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- May 8, 2024
- Abate by
- Jun 4, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a. Shop: On or about February 5, 2024, and at times prior, employees were exposed to struck by hazards while using the King Bench Grinder to grind materials and tools with tongue guard setting greater that 1/4 inch from the wheel. b. Shop: On or about February 5, 2024, and at times prior, employees were exposed to struck by hazards while using the Millers Tools Bench Grinder to grind materials and tools with tongue guard setting greater that 1/4 inch from the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.37 A03
- Issued
- May 8, 2024
- Abate by
- Jun 4, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(3):Exit route(s) were not kept free and unobstructed: Shop: On or about February 5, 2024, and at times prior, employees were exposed to entrapment hazards in the event of an emergency performing auto and body repair in a facility with a blocked emergency exit.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01
- Issued
- May 8, 2024
- Abate by
- Jun 4, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a. Shop: On or about February 5, 2024, and at times prior, the employer failed to ensure that adequate space was maintained around electrical panels to allow for safe operation of the breakers in the event of emergency.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Frank'S Body Shop
View Frank'S Body Shop's full OSHA safety record →
More inspections in this industry (NAICS 811111)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347264541.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.