PELHAM, NH —
OSHA Inspection: UPNOVR, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of UPNOVR, INC. in 31 PULPIT ROCK ROAD, PELHAM, NH 03076 (NAICS 331313). OSHA activity number 347279234.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Upnovr, INC. — free
Get an email when a new federal OSHA severe-injury report for Upnovr, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- UPNOVR, INC.
- Site address
- 31 PULPIT ROCK ROAD
- City
- PELHAM
- State
- NH
- ZIP
- 03076
- Mailing
- P.O. BOX 199, PELHAM, NH 03076
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331313
- Employees
- 7
- Ownership type
- A
Citations
15 citations on file for this inspection.
1910.22 A01
- Issued
- Apr 10, 2024
- Penalty
- Initial $2,074 · Current $1,037 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. Shop - On or about February 14, 2024, the shop floor had welding cords and extension cords running across passageways that were exposing employees to slips, trips and falls.
Recent events (2)
- — I (O) $1037
- — Z (S) $2074
1910.213 C01
- Issued
- Apr 10, 2024
- Penalty
- Initial $3,457 · Current $1,729 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. a.) Main Shop - On or about February 14, 2024, the Rockwell Unisaw was not equipped with a guard which completely enclosed the portion of the saw above the table and above the material being cut. b.) Fiberglass room - On or about February 14, 2024, the Craftsman table saw was not equipped with a guard which completely enclosed the portion of the saw above the table and above the material being cut.
Recent events (2)
- — I (S) $1728.5
- — Z (S) $3457
1910.213 C02
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Handfed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. a.) Main Shop - On or about February 14, 2024, the Rockwell Unisaw was not equipped with a spreader to prevent material from binding on the saw blade or being thrown back at the operator. b.) Fiberglass room - On or about February 14, 2024, the Craftsman table saw was not equipped with a spreader to prevent material from binding on the saw blade or being thrown back at the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Handfed ripsaw(s) were not provided with non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. a.) Main Shop - On or about February 14, 2024, the Rockwell Unisaw was not equipped with non-kickback fingers to protect the operator from material being thrown back toward them. b.) Fiberglass Room- On or about February 14, 2024, the Craftsman Table saw was not equipped with non-kickback fingers to protect the operator from material being thrown back toward them.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A02
- Issued
- Apr 10, 2024
- Penalty
- Initial $3,457 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections. Main Shop - On or about February 14, 2024, employees were not protected from rotating parts where the Central Machinery pedestal grinder was not equipped with a guard which covered the spindle end and nut on the left side of the machine.
Recent events (2)
- — I (S) $0
- — Z (S) $3457
1910.215 A04
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch. Main Shop - On or about February 14, 2024, employees were not protected from the in running nip point of the Central Machinery pedestal grinder where the work rest on the left side of the machine was not adjusted to within one eighth inch of the wheel. Additionally, the right side of the machine was not equipped with a work rest.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. Main Shop - On or about February 14, 2024, employees were not protected from flying sparks and debris where the Central Machinery pedestal grinder was equipped with a tongue guard on the right side of the machine that exceeded one fourth inch distance from the wheel. Additionally, the left side of the machine was not equipped with a tongue guard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.243 C03
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel. a.) Shop, Dewalt model DWE4120 angle grinder- On or about February 14, 2024, the Dewalt handheld portable angle grinder did not have a safety guard installed on it to protect the operator. b.) Shop, Bosch model GWS8-45 angle grinder- On or about February 14, 2024, the Bosch handheld portable angle grinder did not have a safety guard installed on it to protect the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.253 B02 II
- Issued
- Apr 10, 2024
- Penalty
- Initial $1,763 · Current $882 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders were not located where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons. Shop - On or about February 14, 2024, a compressed gas cylinder at a welding station was not stored and secured in a location where it could not be knocked over or damaged by passing or falling objects.
Recent events (2)
- — I (S) $881.5
- — Z (S) $1763
1910.253 B04 III
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet. Shop, full cylinder storage rack- On or about February 14, 2024, oxygen cylinders in the shop were stored next to fuel-gas cylinders and not separated by a minimum distance of 20 feet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Apr 10, 2024
- Abate by
- Apr 29, 2024
- Penalty
- Initial $2,765 · Current $1,383 Reduced
General-duty citation text
1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. On or about February 14, 2024, employees were not provided effective training on all of the elements within the Hazard Communication Program in accordance with the provisions contained in paragraphs (h)(3)(i)-(h)(3)(iv). Employees were not aware of the hazards of the chemicals and substances they work with or where to locate safety data sheets in the workplace.
Recent events (2)
- — I (S) $1382.5
- — Z (S) $2765
1910.1200 F06
- Issued
- Apr 10, 2024
- Abate by
- Apr 22, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information specified under paragraphs (f)(6)(i) through (ii) of this section. Main Shop - On or about February 14, 2024, the employer did not ensure that each bottle of hazardous chemicals in the workplace was labeled, where 2 spray bottles were found with no labeling that contained WD-40, a lubricant that is listed as extremely flammable as well as a skin and eye irritant.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.106 D03 II
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(d)(3)(ii): Flammable liquid storage cabinet(s) were not labeled in conspicuous lettering, "Flammable - Keep Fire Away". Main Shop - On or about February 14, 2024, the flammable liquids storage cabinet was not labeled conspicuously to identify the flammable hazard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L04 III
- Issued
- Apr 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years. Main Shop, TCM forklift model FHG16- On or about February 14, 2024, the operator of the TCM forklift was certified on March 25, 2004, and had not received an evaluation of performance every three years as required since that date.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 H06
- Issued
- Apr 10, 2024
- Abate by
- Apr 22, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(h)(6): Strain relief was not provided at connections and terminations. Main Shop, Niagara punch press - On or about February 14, 2024, strain relief was not provided for the wiring entering the control panel at the fitting, where the flexible metal conduit had pulled away and exposed the internal insulated conductors.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Upnovr, INC.
View Upnovr, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331313)
Apr 30, 2026
Luxfer MEL Technologies · FLEMINGTON, NJ
Mar 24, 2026
Pure Aluminum LLC · SARANAC, MI
Feb 25, 2026
Coast Aluminum, INC. · SANTA FE SPRINGS, CA
Feb 11, 2026
Silver Dollar Castings Corp. · CHICAGO, IL
Jan 26, 2026
Pure Aluminum LLC · SARANAC, MI
More inspections in NH
Jul 17, 2026
Star Construction SVS INC · ROCHESTER, NH
Jul 16, 2026
Omni Components Corp. · HUDSON, NH
Jul 16, 2026
Andrew Grant'S Tree Service · NEW BOSTON, NH
Jul 15, 2026
Rodas Construction Corp · PORTSMOUTH, NH
Jul 15, 2026
Knox Marsh Development LLC · DOVER, NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347279234.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.