BUNNELL, FL —
OSHA Inspection: SIZEMORE WELDING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SIZEMORE WELDING, INC. in 901 EAST MOODY BLVD., BUNNELL, FL 32110 (NAICS 332510). OSHA activity number 347335135.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Sizemore Welding, INC. — free
Get an email when a new federal OSHA severe-injury report for Sizemore Welding, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- SIZEMORE WELDING, INC.
- Site address
- 901 EAST MOODY BLVD.
- City
- BUNNELL
- State
- FL
- ZIP
- 32110
- Mailing
- 901 EAST MOODY BLVD., BUNNELL, FL 32110
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332510
- Employees
- 36
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- Mar 20, 2024
- Penalty
- Initial $11,292 · Current $6,700 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about March 8, 2024, in the sanding shop, the 12 inch Sears Craftsman band saw used to cut pipe did not have the guard to cover the unused portion of the blade, exposing employees to laceration and amputation hazards. b. On or about March 8, 2024, in the machine shop, the IKEGAI Lathe did not have a chuck guard, exposing employees to hazards such as those created by point of operation and rotating parts c. On or about March 8, 2024, in the machine shop, all three BridgePort Drill Presses did not have guards, exposing employees to hazards such as those created by point of operation and rotating parts. d. On or about March 8, 2024, in the machine shop, the JET Drill Press did not have a guard, exposing employees to hazards such as those created by point of operation and rotating parts. e. On or about March 8, 2024, in the machine shop, the Powermatic Drill Press did not have a guard, exposing employees to hazards such as those created by point of operation and rotating parts. f. On or about March 8, 2024, in the machine shop, the Wilton Drill Press did not have a guard, exposing employees to hazards such as those created by point of operation and rotating parts.
Recent events (2)
- — I (S) $6700
- — Z (S) $11292
1910.215 A02
- Issued
- Mar 20, 2024
- Penalty
- Initial $11,292 · Current $6,700 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: a. On or about March 8, 2024, in the welding shop, the Dewalt 8 inch bench grinder did not have a guard covering the spindle end, exposing employees to a caught-in hazard. b. On or about March 8, 2024, in the sanding shop, the Delta 6 inch bench grinder did not have a guard covering the spindle end, exposing employees to a caught-in hazard. c. On or about March 8, 2024, in the sanding shop, the Palgreen 10 inch bench grinder did not have a guard covering the spindle end, exposing employees to a caught-in hazard.
Recent events (2)
- — I (S) $6700
- — Z (S) $11292
1910.215 A04
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a. On or about March 8, 2024, in the welding shop, employees were operating a Dewalt 8 inch bench grinder without adjusting work rests to one eighth of an inch, exposing employees to struck by hazards. b. On or about March 8, 2024, in the sanding shop, employees were operating a Delta 6 inch bench grinder without adjusting work rests to one eighth of an inch, exposing employees to struck by hazards. c. On or about March 8, 2024, in the sanding shop, employees were operating a Palgreen 10 inch bench grinder without adjusting work rests to one eighth of an inch, exposing employees to struck by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a. On or about March 8, 2024, in the welding shop, employees were operating a Dewalt 8 inch bench grinder that did not have the tongue guard adjusted to one-fourth inch from the grinding wheel, exposing employees to struck by hazards. b. On or about March 8, 2024, in the sanding shop, employees were operating a Delta 6 inch bench grinder that did not have the tongue guard adjusted to one-fourth inch from the grinding wheel, exposing employees to struck by hazards. c. On or about March 8, 2024, in the sanding shop, employees were operating a Palgreen 10 inch bench grinder that did not have the tongue guard adjusted to one-fourth inch from the grinding wheel, exposing employees to struck by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.243 C03
- Issued
- Mar 20, 2024
- Penalty
- Initial $4,839 · Current $2,850 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel: a. On or about March 8, 2024, in the sanding shop, employees operate portable grinders without a safety guard, exposing employees to caught in hazards.
Recent events (2)
- — I (S) $2850
- — Z (S) $4839
1910.212 B
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a. On or about March 8, 2024, in the machine shop, drill presses are not securely anchored, exposing employees to a struck by hazard. b. On or about March 8, 2024, in the welding shop, the grinder is not securely anchored, exposing employees to a struck by hazard. c. On or about March 8, 2024, in the sanding shop, the grinders on pedestals are not securely anchored, exposing employees to a struck by hazard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Sizemore Welding, INC.
View Sizemore Welding, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332510)
May 8, 2026
Stanley Security Solutions, INC. · MONROEVILLE, PA
May 5, 2026
Dundee Manufacturing Company · DUNDEE, MI
Apr 20, 2026
International Engineering & Manufacturing INC · HOPE, MI
Mar 26, 2026
WA317990273 - Kitsap Composites INC · PORT ORCHARD, WA
Feb 23, 2026
Savant Manufacturing, INC. · KINDER, LA
More inspections in FL
Jul 16, 2026
Ball Fabrics · DELAND, FL
Jul 16, 2026
Wacky Sauces LLC · GAINESVILLE, FL
Jul 16, 2026
Waste Management, INC. of Florida · FORT WALTON BEACH, FL
Jul 16, 2026
Resolute Roofing LLC · PONCE INLET, FL
Jul 16, 2026
J & J Tree Experts, INC. · PALM COAST, FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347335135.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.