ARLINGTON HEIGHTS, IL —
OSHA Inspection: LEGACY MASONRY CO.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of LEGACY MASONRY CO. in 124 S. RIDGE AVE, ARLINGTON HEIGHTS, IL 60005 (NAICS 238140). OSHA activity number 347341802.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LEGACY MASONRY CO.
- Site address
- 124 S. RIDGE AVE
- City
- ARLINGTON HEIGHTS
- State
- IL
- ZIP
- 60005
- Mailing
- 133 N CADY DR, PALATINE, IL 60067
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.1153 C01
- Issued
- May 20, 2024
- Abate by
- Jun 14, 2024
- Penalty
- Initial $5,323 · Current $2,500 Reduced
9000
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified in Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. a) On or about March 13, 2024, at 124 S. Ridge Ave, Arlington Heights, IL 60005, Legacy Masonry Co. did not fully and properly implement engineering controls and work practices, as specified in Table 1 when using a Stihl TS 420 power cutter saw to cut dolomite containing 2-10 percent of respirable crystalline silica (Quartz) without equipping the tool with a water delivery system that supplies a continuous stream or spray of water at the point of impact or a tool equipped with a commercially available shroud and dust collection system.
Recent events (2)
- — I (O) $2500
- — Z (S) $5323
1926.1153 D02 I
- Issued
- May 20, 2024
- Abate by
- Jun 14, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: a) On or about March 13, 2024, at 124 S. Ridge Ave, Arlington Heights, IL 60005, Legacy Masonry Co. did not assess the exposure to respirable crystalline silica of an employee cutting dolomite containing up to 2 to 10% respirable crystalline silica (Quartz).
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.1153 I01
- Issued
- May 20, 2024
- Abate by
- Jun 14, 2024
- Penalty
- Initial $5,323 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1153(i)(1): The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200): a) On or about March 13, 2024, at 124 S. Ridge Ave, Arlington Heights, IL 60005, Legacy Masonry did not include respirable crystalline silica in the program established to comply with the hazard communication standard. Exposure occurred when the employees used a Stihl TS 420 power cutter saw to cut dolomite containing 2-10 percent of respirable crystalline silica (Quartz) without engineering controls.
Recent events (2)
- — I (S) $0
- — Z (S) $5323
More inspections at Legacy Masonry CO.
View Legacy Masonry CO.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347341802.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.