COBLESKILL, NY —
OSHA Inspection: IRVING FOREST PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of IRVING FOREST PRODUCTS, INC. in 128 MACARTHUR AVE., COBLESKILL, NY 12043 (NAICS 321999). OSHA activity number 347342024.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IRVING FOREST PRODUCTS, INC.
- Site address
- 128 MACARTHUR AVE.
- City
- COBLESKILL
- State
- NY
- ZIP
- 12043
- Mailing
- 128 MACARTHUR AVE., COBLESKILL, NY 12043
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 65
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- Aug 26, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $16,131 · Current $16,131
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. a) Worksite, SAW-Cobleskill Value Added: On or about March 1, 2024, the employer did not establish a written program consisting of the control of hazardous energy, associated equipment specific lockout/tagout procedures, authorized training, and periodic inspections for employees performing maintenance on a Conception CRP 2000 Finger Jointing System, Press Section, Model Number 4613, Serial Number J120E.
Recent events (3)
- — F (O) $16131
- — C (S) $16131
- — Z (S) $16131
1910.147 C07 I A
- Issued
- Aug 26, 2024
- Abate by
- Oct 11, 2024
- Penalty
- Initial $16,131 · Current $16,131
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. a) Worksite, SAW-Cobleskill Value Added: On or about March 1, 2024, the employee was performing maintenance on a Conception CRP 2000 Finger Jointing System, Press Section, Model Number 4613, Serial Number J120E and was not provided with the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.
Recent events (3)
- — F (O) $16131
- — C (S) $16131
- — Z (S) $16131
1910.147 C04 I
- Issued
- Aug 26, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $161,310 · Current $81,214 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. a) Worksite, SAW-Cobleskill Value Added, Corner transfer of FJ #1, overhead chain drive: On or about March 1, 2024, the employer failed to develop procedures for the control of potentially hazardous energy while employees are performing preventative maintenance on the Finger Jointer #1 machine. Employees are exposed to caught-in hazards. Irving Forest Products, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(4)(ii)(B), which was contained in OSHA inspection number 1467725, citation number 1, item number 1, and was affirmed as a final order on June 10, 2020, with respect to a workplace located in Dixfield, Maine.
Recent events (3)
- — F (S) $81214
- — C (R) $161310
- — Z (R) $161310
1904.39 A02
- Issued
- Aug 26, 2024
- Penalty
- Initial $11,524 · Current $11,524
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a) Worksite, SAW-Cobleskill Value Added, Corner transfer of FJ #1, overhead chain drive: On or about March 1, 2024, the employer did not report work a work-related incident resulting in an amputation to OSHA within 24 hours.
Recent events (3)
- — F (O) $11524
- — C (O) $11524
- — Z (O) $11524
More inspections at Irving Forest Products, INC.
View Irving Forest Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347342024.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.