Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DUO-SAFETY LADDER CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DUO-SAFETY LADDER CORPORATION in 513 W. 9TH AVENUE, OSHKOSH, WI 54903 (NAICS 332999). OSHA activity number 347361925.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Duo-Safety Ladder Corporation — free Get an email when a new federal OSHA severe-injury report for Duo-Safety Ladder Corporation is published. One employer, no account, unsubscribe in one click.
Site address
513 W. 9TH AVENUE
City
OSHKOSH
State
WI
ZIP
54903
Mailing
PO BOX 497, OSHKOSH, WI 54903
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
35
Ownership type
A

5 citations on file for this inspection.

1910.178 A04

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 16, 2024
Abate by
Sep 16, 2024
Penalty
Initial $6,857 · Current $4,114 Reduced
29 CFR  1910.178(a)(4): Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.  On and before March 21, 2024, with respect to an establishment located at 513 W. 9th Avenue, Oshkosh, WI 54903, employees were operating a Nissan Model KPHO2A25PV, LP Powered Forklift with a Ballymore Manlift Attachment. The employer did not ensure that the lift was equipped with a plate, tag or decal outlining the safe operating procedures and maintenance of the lift.
Recent events (2)
  • — I (S) $4114.2
  • — Z (S) $6857

1910.178 L04 III

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 16, 2024
Abate by
Sep 16, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.  On and before March 21, 2024, with respect to an establishment located at 513 W. 9th Avenue, Oshkosh, WI 54903, the employer did not ensure that each powered industrial truck operator had been evaluated within the previous three years.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.217 B07 III

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 16, 2024
Abate by
Sep 16, 2024
Penalty
Initial $6,857 · Current $4,114 Reduced
29 CFR  1910.217(b)(7)(iii): A means of selecting Off, "Inch," Single Stroke, and Continuous (when the continuous function is furnished) shall be supplied with the clutch/brake control to select type of operation of the press. Fixing of selection shall be by means capable of supervision by the employer.  On and before March 21, 2024, with respect to an establishment located at 513 W. 9th Avenue, Oshkosh, WI 54903, the employer did not ensure that the 60-Ton Federal Part Revolution Press, Serial No. PR-0006, "Big Fed", had a method where the selection of the Off, "Inch," Single Stroke, and Continuous modes could be fixed under supervision of the employer, as the key for selecting those modes had been left in the press.
Recent events (2)
  • — I (S) $4114.2
  • — Z (S) $6857

1910.217 C02 I B

Serious Gravity 5 3 instances 5 exposed
Issued
Aug 16, 2024
Abate by
Sep 16, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.217(c)(2)(i)(b): Every point of operation guard shall conform to the maximum permissible openings of Table O-10.  a) On and before March 21, 2024, with respect to an establishment located at 513 W. 9th Avenue, Oshkosh, WI 54903, the employer did not ensure that the barrier guards installed on Federal Press #2 were installed to prevent access to the point of operation according to the requirement of Table O-10.  b) On and before March 21, 2024, with respect to an establishment located at 513 W. 9th Avenue, Oshkosh, WI 54903, the employer did not ensure that the barrier guards installed on Federal Press #3 were installed to prevent access to the point of operation according to the requirement of Table O-10.  c) On and before March 21, 2024, with respect to an establishment located at 513 W. 9th Avenue, Oshkosh, WI 54903, the employer did not ensure that the barrier guards installed on Federal Press #4 were installed to prevent access to the point of operation according to the requirement of Table O-10.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.217 D09 I

Other-than-serious 1 instance 10 exposed
Issued
Aug 16, 2024
Abate by
Sep 16, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.217(d)(9)(i): The employer shall establish a diesetting procedure that will insure compliance with paragraph (c) of this section.  On and before March 21, 2024, with respect to an establishment located at 513 W. 9th Avenue, Oshkosh, WI 54903, the employer did not ensure that a Die Setting Procedure had been developed and implemented prior to allowing employees to conduct the task.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Duo-Safety Ladder Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347361925.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.