NORTH TONAWANDA, NY —
OSHA Inspection: AN-COR INDUSTRIAL PLASTICS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AN-COR INDUSTRIAL PLASTICS, INC. in 900 NIAGARA FALLS BLVD, NORTH TONAWANDA, NY 14120 (NAICS 325211). OSHA activity number 347363632.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AN-COR INDUSTRIAL PLASTICS, INC.
- Site address
- 900 NIAGARA FALLS BLVD
- City
- NORTH TONAWANDA
- State
- NY
- ZIP
- 14120
- Mailing
- 900 NIAGARA FALLS BLVD, NORTH TONAWANDA, NY 14120
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325211
- Employees
- 50
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.22 A01
- Issued
- Jul 16, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $8,067 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): Place(s) of employment were not kept clean a) On or about 03/21/2024, the Grinding Area, where employees grind fiberglass vessels contained a hazardous accumulation of combustible dust such as resin and fiberglass dust along floors, walls, surfaces, roof structures, dust booths, and electrical installations exposing employees to fire and explosion hazards. b) On or about 03/21/2024, the CNC Room, where employees use the CNC router contained a hazardous accumulation of combustible dust such as wood dust along floors, walls, surfaces, and electrical installations exposing employees to fire and explosion hazards. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $4000
- — Z (S) $8067
1910.307 C
- Issued
- Jul 16, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $0 · Current $0
E200
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: a) On or about 03/21/2024, On the Production floor, combustible dust from fiberglass and resin was accumulating on surfaces while intrinsically unsafe electrical wiring, outlets with faceplates unprotected lighting, and non-dustproof equipment were utilized, exposing employees to fire and explosion hazards. b) On or about 03/21/2024, in the CNC room, combustible dust from wood was accumulating on surfaces while intrinsically unsafe electrical wiring, and non-dust proof equipment were utilized, exposing employees to fire and explosion hazards. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.106 E02 II B 2
- Issued
- Jul 16, 2024
- Abate by
- Jun 2, 2025
- Penalty
- Initial $8,067 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.106(e)(2)(ii)(b)(2): The quantity of Category 2, 3 or 4 flammable liquid located outside of an inside storage room or storage cabinet in a building or in any one fire area of a building exceeded 120 gallons: a) On or about 03/21/2024; in the Mixing Room; employees are exposed to fire hazards when the quantity of Category 2 and 3 flammable, such as but not limited to epoxy vinyl ester resin, Cobalt 6% and Acetone, located outside of an inside storage room or storage cabinet in a building or in any one fire area of a building, was approximately 330 gallons. b) On or about 03/21/2024; in walkway by the PCX area; employees are exposed to fire hazards when the quantity of Category 2 and 3 flammable, such as but not limited to epoxy vinyl ester resin, Hetron 197-3 resin, and Hetron 800 resin, located outside of an inside storage room or storage cabinet in a building or in any one fire area of a building, was approximately 990 gallons. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $4000
- — Z (S) $8067
1910.106 E06 II
- Issued
- Jul 16, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $6,453 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.106(e)(6)(ii): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F (37.8 C), were dispensed into containers without the nozzle and container being electrically interconnected. a) On or about 03/21/2024, in the Acetone stations throughout the production area, when employees dispose of the Acetone from their small container to the 55-gallon drum, employees did not use bonding wires to electrically interconnect the drums and containers together, exposing employees to fire hazards. b) On or about 03/21/2024, in the mixing room, when employees mixed flammable liquids such as resins (styrene) and catalysts (Cobalt, MEKP) in 55-gallon drums, employees did not use bonding wires to electrically interconnect the containers or the mixer together exposing employees to fire hazards. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $3500
- — Z (S) $6453
1910.106 E06 I
- Issued
- Jul 16, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(e)(6)(i): Adequate precautions were not taken to prevent the ignition of flammable vapors from sources such as open flames; lightning; smoking; cutting and welding; hot surfaces; frictional heat; static, electrical, and mechanical sparks; spontaneous ignition, including heat-producing chemical reactions; and radiant heat: a) On or about 03/21/2024, in the mixing room, when employees mixed flammable liquids such as resins (styrene) and catalysts (Cobalt, MEKP) in 55-gallon drums, employees did not ground the drum to remove static electricity, exposing employees to fire hazards. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jul 16, 2024
- Penalty
- Initial $6,857 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: a) On or about 03/21/2024, in the Grinding Area, when employees operate the table saw to cut fiberglass products, employees are exposed to amputation hazards due to the blade being exposed. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $3500
- — Z (S) $6857
1910.243 C04
- Issued
- Jul 16, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $4,839 · Current $0 Reduced
General-duty citation text
29 CFR 1910.243(c)(4):The angular exposure on the grinding wheel periphery and sides for safety guard(s) used on portable grinding machine(s) exceeded 180 degrees: a) On or about 03/21/2024, in the grinding area, when employees grind fiberglass products they use DeWALT angle grinders that do not have the guards attached, exposing employees to laceration hazards. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $4839
1910.157 G03
- Issued
- Jul 16, 2024
- Abate by
- Aug 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(3): Employees who have been designated to use fire fighting equipment as part of the emergency action plan were not provided training in the use of the appropriate equipment: a) On 03/21/2024, throughout the establishment, employees who were designated to use fire extinguishers in the event of a fire were not provided hands-on practical training on the use of fire extinguishers. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at An-Cor Industrial Plastics, INC.
View An-Cor Industrial Plastics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 325211)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347363632.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.