Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PIERCE MANUFACTURING, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of PIERCE MANUFACTURING, INC. in 1512 38TH AVE E, BRADENTON, FL 34208 (NAICS 336120). OSHA activity number 347372625.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pierce Manufacturing, INC. — free Get an email when a new federal OSHA severe-injury report for Pierce Manufacturing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1512 38TH AVE E
City
BRADENTON
State
FL
ZIP
34208
Mailing
1512 38TH AVE E, BRADENTON, FL 34208
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336120
Employees
400
Ownership type
A

4 citations on file for this inspection.

1910.134 C01

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
Sep 19, 2024
Abate by
Nov 6, 2024
Penalty
Initial $6,913 · Current $0 Reduced

Hazardous substances 9000

29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a) At 1512 38th Ave E, Bradenton, Florida: On or about March 26, 2024, the employer did not develop and implement a written worksite specific respiratory protection program for employees provided and required to use tight-fitting facepiece respirators.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6913

1910.134 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 19, 2024
Abate by
Nov 6, 2024
Penalty
Initial $0 · Current $2,765

Hazardous substances 9000

29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) At 1512 38th Ave E, Bradenton, Fl:: On or about March 26, 2024, the employer did not provide a medical evaluation to determine each employees' ability to use a respiratory protection before requiring use, in that, employees involved in polishing/grinding cement floors were provided and required to use tight-fitting facepiece respirators.
Recent events (2)
  • — I (S) $2765.2
  • — Z (S) $0

1910.134 F01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 19, 2024
Abate by
Nov 6, 2024
Penalty
Initial $0 · Current $2,765

Hazardous substances 9000

29 CFR  1910.134(f)(1):The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):  (a)At 1512 38th Ave E, Bradenton, Fl: On or about March 26, 2024, the employer did not develop and implement a written worksite specific respiratory protection program for employees provided and required to use tight-fitting facepiece respirators.
Recent events (2)
  • — I (S) $2765.2
  • — Z (S) $0

1910.134 K01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Sep 19, 2024
Abate by
Nov 6, 2024
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1910.134(k)(1):The employer did not provide respirator training that would ensure each employee could demonstrate knowledge of items in section (i)-(vii):  a) At 1512 38th Ave E, Bradenton, Fl:: On or about March 26, 2024, the employer did not provide a medical evaluation to determine each employees' ability to use a respiratory protection before requiring use, in that, employees involved in polishing/grinding cement floors were provided and required to use tight-fitting facepiece respirators.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Pierce Manufacturing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347372625.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.