BELLEVUE, WI —
OSHA Inspection: K. KELLY, INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of K. KELLY, INC in 2057 BELLEVUE STREET, BELLEVUE, WI 54311 (NAICS 238220). OSHA activity number 347385221.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- K. KELLY, INC
- Site address
- 2057 BELLEVUE STREET
- City
- BELLEVUE
- State
- WI
- ZIP
- 54311
- Mailing
- 2057 BELLEVUE STREET, BELLEVUE, WI 54311
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 72
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.23 B08
- Issued
- Jun 7, 2024
- Abate by
- Jul 9, 2024
- Penalty
- Initial $4,839 · Current $3,387 Reduced
General-duty citation text
29 CFR 1910.23(b)(8) :(8) Ladders are used only for the purposes for which they were designed. On or about April 2, 2024, at location 2057 Bellevue Street, Bellevue, Wisconsin, the employer failed to ensure that ladders were used solely for their intended purposes, resulting in employees being exposed to fall hazards while utilizing A-frame ladders for accessing and exiting the mezzanine situated within the auto shop.
Recent events (2)
- — I (S) $3387.3
- — Z (S) $4839
1910.28 B01 I
- Issued
- Jun 7, 2024
- Abate by
- Jul 9, 2024
- Penalty
- Initial $4,839 · Current $3,387 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i):(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following: On or about April 2, 2024, at location 2057 Bellevue Street, Bellevue, Wisconsin: employer failed to adequately protect employees from fall hazards: a) Plumbers Bay, Employees were exposed to fall hazards when accessing the mezzanine, standing approximately eight feet high, and not protected from fall hazards. b) Auto Bay, Employees were exposed to fall hazards when accessing the mezzanine, standing approximately eight feet high, and not protected from fall hazards.
Recent events (2)
- — I (S) $3387.3
- — Z (S) $4839
1910.29 F04
- Issued
- Jun 7, 2024
- Abate by
- Jul 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.29(f)(4) :(4) Openings in stair rails. No opening in a stair rail system exceeds 19 inches (48 cm) at its least dimension; On or about April 2, 2024, at location 2057 Bellevue Street, Bellevue, Wisconsin: the employer neglected to install mid-rails on the stairs utilized by employees to access the mezzanine in the Plumbers Bay area, exposing employees to potential fall hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L02 II
- Issued
- Jun 7, 2024
- Penalty
- Initial $6,453 · Current $4,517 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): Training shall consist of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. On or about April 2, 2024, at location 2057 Bellevue Street, Bellevue, Wisconsin: the employer failed to complete training and evaluation for employees that were operating powered industrial vehicles.
Recent events (2)
- — I (S) $4517.1
- — Z (S) $6453
1910.178 L04 III
- Issued
- Jun 7, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years. On or about April 2, 2024, at location 2057 Bellevue Street, Bellevue, Wisconsin: the employer did not evaluate each powered industrial truck operator's performance to ensure they had the knowledge and skill to operate safely.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Jun 7, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks shall be examined before being placed in service and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected. On or about April 2, 2024, at location 2057 Bellevue Street, Bellevue, Wisconsin: employer was not ensuring employees operating a Toyota Forklift (Model: 8FGU18 Serial: 65235) were conducting inspections prior to use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at K. Kelly, INC
View K. Kelly, INC's full OSHA safety record →
More inspections in this industry (NAICS 238220)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347385221.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.