Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: Q.T. RENTS, L.L.C.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of Q.T. RENTS, L.L.C. in 601 WALNUT CT., ROCKDALE, IL 60436 (NAICS 423110). OSHA activity number 347387979.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Q.T. Rents, L.L.C. — free Get an email when a new federal OSHA severe-injury report for Q.T. Rents, L.L.C. is published. One employer, no account, unsubscribe in one click.
Establishment
Q.T. RENTS, L.L.C.
Site address
601 WALNUT CT.
City
ROCKDALE
State
IL
ZIP
60436
Mailing
1 TEAMQUEST WAY, CLEAR LAKE, IA 50428
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423110
Employees
40
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 10 1 instance 1 exposed
Issued
May 29, 2024
Penalty
Initial $11,292 · Current $7,904 Reduced
29 CFR  1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a. On or about March 15, 2024, the employer failed to ensure that employee(s) who operate powered industrial trucks, were properly trained, evaluated and certified to perform the tasks in a safe manner, thereby exposing employees to struck-by hazards.
Recent events (2)
  • — I (S) $7904.4
  • — Z (S) $11292

1910.180 D04

Serious Gravity 5 1 instance 1 exposed
Issued
May 29, 2024
Penalty
Initial $8,067 · Current $5,647 Reduced
29 CFR  1910.180(d)(4): Complete inspection(s) of crane(s) were not performed at intervals as generally defined in 1910.180(d)(ii) with a determination made as to whether deficiencies constituted a safety hazard:  a.	 On or about April 3, 2024, in the work yard, complete periodic inspection of the Grove mobile crane, model # RT 530E-2 utilized had not been conducted within the past 12 months, thereby exposing employees to the hazards associated with crane operations.
Recent events (2)
  • — I (S) $5646.9
  • — Z (S) $8067

1910.184 D

Serious Gravity 1 1 instance 1 exposed
Issued
May 29, 2024
Penalty
Initial $4,839 · Current $3,387 Reduced
29 CFR  1910.184(d): Damaged or defective sling(s) were not immediately removed from service:  a) On or about February 23, 2024, the employer failed to ensure slings utilized for lifting operations were free of damage were removed, thereby exposing employees to struck by hazards.
Recent events (2)
  • — I (S) $3387.3
  • — Z (S) $4839

1910.253 E03 II C 3

Serious Gravity 5 1 instance 1 exposed
Issued
May 29, 2024
Penalty
Initial $8,067 · Current $5,647 Reduced
29 CFR  1910.253(e)(3)(ii)(C)(3): Flashback protection was not provided by an approved device that would prevent flame from passing into the fuel gas system:  a. On or about April 3, 2024, in the automotive shop the employer failed to have a flashback arrestor installed on the oxygen cylinder, thereby exposing employees to fire and explosion hazards.
Recent events (2)
  • — I (S) $5646.9
  • — Z (S) $8067

1910.303 B01 I

Serious Gravity 5 1 instance 1 exposed
Issued
May 29, 2024
Penalty
Initial $8,067 · Current $5,647 Reduced
29 CFR  1910.303(b)(1)(i): Electric equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees. Safety of equipment was not determined under suitability for installation and use in conformity with this subpart:  a.	 On or about April 3, 2024, in the facility, the electrical extension cord utilized a 1900 electrical box as a junction point for a 250 volt plug to power welding equipment, thereby exposing employees to the hazards of electrical shock.
Recent events (2)
  • — I (S) $5646.9
  • — Z (S) $8067

View Q.T. Rents, L.L.C.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347387979.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.