Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARK-10 CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MARK-10 CORPORATION in 11 DIXON AVENUE, COPIAGUE, NY 11726 (NAICS 334515). OSHA activity number 347438848.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mark-10 Corporation — free Get an email when a new federal OSHA severe-injury report for Mark-10 Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
MARK-10 CORPORATION
Site address
11 DIXON AVENUE
City
COPIAGUE
State
NY
ZIP
11726
Mailing
11 DIXON AVENUE, COPIAGUE, NY 11726
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
334515
Employees
60
Ownership type
A

4 citations on file for this inspection.

1910.37 A03

Serious Gravity 5 1 instance 25 exposed
Issued
Sep 25, 2024
Penalty
Initial $8,067 · Current $4,800 Reduced
1910.37(a)(3): Exit routes were not free and unobstructed. No materials or equipment may be placed, either permanently or temporarily, within the exit route.  Worksite: 11 Dixon Avenue, Copiague, NY 11726.  On or about 04/25/2024.  The east side emergency door in the production area was blocked by a temporary employee workstation.  Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • — I (S) $4800
  • — Z (S) $8067

1910.178 L01 I

Serious Gravity 5 1 instance 25 exposed
Issued
Sep 25, 2024
Abate by
Oct 7, 2024
Penalty
Initial $6,453 · Current $3,900 Reduced
29 CFR  1910.178(l)(1)(i):  The employer had not ensured that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation.    Worksite: 11 Dixon Avenue, Copiague, NY 11726.   On or about 04/25/2024. Employees operating a Wesco electric pallet jack Model PWS-2-100/16FM Serial No. 131851 in the warehouse were not trained by the employer.   Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $6453

1910.215 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 25, 2024
Abate by
Oct 1, 2024
Penalty
Initial $6,453 · Current $3,900 Reduced
29 CFR  1910.215(a)(1):Abrasive wheel(s) used on grinding machinery were not used with safety guard(s):  Worksite: 11 Dixon Avenue, Copiague, NY 11726.    On or about 04/25/2024. An employee was using a Dayton 1/2 HP bench grinder to smooth out the edge of gauge housing. The grinder was missing the guard.   Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $6453

1910.37 B04

Other-than-serious 1 instance 25 exposed
Issued
Sep 25, 2024
Abate by
Oct 7, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent and the line-of-sight to an exit was not clearly visible.   Worksite: 11 Dixon Avenue, Copiague, NY 11726.    On or about 04/25/2024. The employees in the production area were exposed to fire hazards, because emergency exits were not immediately apparent and the line of sight to an exit was not clearly visible.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Mark-10 Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347438848.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.