ALLENTOWN, PA —
OSHA Inspection: CALIBER HOLDINGS LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CALIBER HOLDINGS LLC in 2033 WALBERT AVE, ALLENTOWN, PA 18104 (NAICS 811121). OSHA activity number 347476806.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CALIBER HOLDINGS LLC
- Site address
- 2033 WALBERT AVE
- City
- ALLENTOWN
- State
- PA
- ZIP
- 18104
- Mailing
- 2941 LAKE VISTA DRIVE ATTN: ERIC BEREZIN, LEWISVILLE, TX 75067
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.141 G02
- Issued
- Nov 12, 2024
- Abate by
- Dec 9, 2024
- Penalty
- Initial $13,828 · Current $0 Reduced
9135
General-duty citation text
29 CFR 1910.141(g)(2): Employees were permitted to consume food or beverage in area(s) exposed to toxic materials: a) 2033 Walbert Ave. Allentown, PA 18104 (Main Garage) - On or about May 13, 2024, employees were observed consuming both food and beverages in areas exposed to toxic materials including, but not limited to, WD-40 & 3M 05907 Primer. The employer did not prohibit consuming of food and beverage in areas exposed to toxic materials in accordance with this section. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (3)
- — J (S) $0
- — C (S) $13828
- — Z (S) $13828
1910.141 G04
- Issued
- Nov 12, 2024
- Abate by
- Dec 9, 2024
- Penalty
- Initial $0 · Current $0
9135
General-duty citation text
29 CFR 1910.141(g)(4): Food or beverages were stored in area(s) exposed to toxic material(s): a) 2033 Walbert Ave. Allentown, PA 18104 (Lunchroom) - On or about May 13, 2024, employees were observed storing both food and beverages in areas exposed to toxic materials including, but not limited to, WD-40 & 3M 05907 Primer. The employer did not prohibit storage of food or beverage in areas exposed to toxic materials in accordance with this section. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 G01 I A
- Issued
- Nov 12, 2024
- Abate by
- Dec 9, 2024
- Penalty
- Initial $11,520 · Current $15,000
9135
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: a) 2033 Walbert Ave. Allentown, PA 18104 (Main Garage) - On or about May 13, 2024, the employer did not ensure that all employees wearing tight-fitting 3M Half-Mask respirators were clean shaven where the respirator met their faces. This condition exposed employees to fine particulates from sanding, including but not limited to sanding of 3M Panel bonding Adhesives and epoxies, which are known to be fertility toxins, organ toxins, and carcinogens. Caliber Holdings LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard CFR 1910.134(g)(1)(i)(A), which was contained in OSHA inspection number 1573709, citation number 1, item number 1 and was affirmed as a final order on November 7, 2022, with respect to a workplace located at 2001 Byberry Rd, Philadelphia, PA. Caliber Holdings LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard CFR 1910.134(g)(1)(i)(A), which was contained in OSHA inspection number 1628891, citation number 1, item number 1 and was affirmed as a final order on December 2, 2022, with respect to a workplace located at 10501 West Interstate 70 Frontage Road North, Wheat Ridge, CO 80033. Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photograph or video evidence of abatement or other written records.
Recent events (3)
- — J (R) $15000
- — C (R) $11520
- — Z (R) $11520
1910.1200 F06 II
- Issued
- Nov 12, 2024
- Abate by
- Dec 9, 2024
- Penalty
- Initial $1,152 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical. a) 2033 Walbert Ave. Allentown, PA 18104 (Main Garage) - On or about May 13, 2024, an unlabeled container of adhesive remover that lacked any identifying safety or health information was observed at an employee work shelf. The employer did not ensure that containers of hazardous chemicals were labeled, tagged or marked with the required information in accordance with this section. Caliber Holdings LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard CFR 1910.1200(f)(6)(ii), which was contained in OSHA inspection number 1572885, citation number 1, item number 1 and was affirmed as a final order on April 1, 2022, with respect to a workplace located at 8061 South Broadway Littleton, CO 80122 Caliber Collision was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.1200(f)(6), which was contained in OSHA inspection number 1454279 , citation number 1, item number 1 and was affirmed as a final order on May 12, 2020, with respect to a workplace located at 790 Copper Center Parkwaynull, Colorado Springs, CO 80921 Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photograph or video evidence of abatement or other written records.
Recent events (3)
- — J (R) $0
- — C (R) $1152
- — Z (R) $1152
1910.141 A03 I
- Issued
- Nov 12, 2024
- Abate by
- Dec 9, 2024
- Penalty
- Initial $0 · Current $0
9135
General-duty citation text
29 CFR 1910.141(a)(3)(i): Places of employment were not kept clean to the extent that the nature of the work allowed. a) 2033 Walbert Ave. Allentown, PA 18104 (Lunchroom) - On or about May 13, 2024, the employee lunchroom was not kept clean from grime, oil, and debris in the workplace and lunchrooms in accordance with this section. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Caliber Holdings LLC
View Caliber Holdings LLC's full OSHA safety record →
More inspections in this industry (NAICS 811121)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347476806.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.