OSHA Inspection: DENNIE'S MANUFACTURING INC.

Issued

Aug 15, 2024

Abate by

Sep 11, 2024

Penalty

Initial $4,839 · Current $2,903 Reduced

General-duty citation text

29 CFR 1910.134(e)(7)(ii): Additional medical evaluations that complied with the requirements of 29 CFR 1910.134 were not provided when a PLHCP, supervisor, or the respirator program administrator informed the employer that an employee needed to be reevaluated.  a) Paint Booth, Dennie's Manufacturing, 2543 State Route 21 Canandaigua, NY, 14427, on or about 5/1/24; Employees required to wear respirators including, but not limited to, 1/2 face elastomeric Honeywell 7700-30L and 1/2 face elastomeric Miller LRP-100 SN ML00894, had not been medically evaluated annually per the reviewing physician's requirements.  Abatement certification is required.

Issued

Aug 15, 2024

Abate by

Sep 11, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(f)(2): Employer did not ensure that employees using a tight-fitting respirator were fit tested prior to initial use, whenever a different respirator facepiece (size, style, make or model) was used, and at least annually thereafter.  a) Paint Booth, Dennie's Manufacturing, 2543 State Route 21 Canandaigua, NY, 14427, on or about 5/1/24: Employees required to wear respirators including, but not limited to, 1/2 face elastomeric Honeywell 7700-30L and 1/2 face elastomeric Miller LRP-100 SN ML00894, had not been fit tested annually.  Abatement certification is required.

Issued

Aug 15, 2024

Abate by

Oct 2, 2024

Penalty

Initial $6,453 · Current $3,872 Reduced

General-duty citation text

29 CFR  1910.147(c)(7)(i):The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices:  a) Mazak, Vertical Center, Nexus 510C-II, Dennie's Manufacturing, 2543 State Route 21 Canandaigua, NY, 14427, on or about 5/1/24; The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required to use energy control devices, employees who were not authorized in lockout tagout were applying and using energy control devices.  Abatement certification is required.

Issued

Aug 15, 2024

Abate by

Sep 11, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(d)(5)(i): All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices:  a) HACO Press Brake, Type ERM5 30-135, Dennie's Manufacturing, 2543 State Route 21 Canandaigua, NY, 14427, on or about 4/15/24: The hydraulic and gravitational energy sources on the HACO Press Brake were not relieved, disconnected, restrained, or otherwise rendered safe after the application of electrical energy isolation.  Abatement certification is required.

Issued

Aug 15, 2024

Penalty

Initial $5,485 · Current $3,291 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) SHARP-1860LV, Lathe in manual machining area, Dennie's Manufacturing, 2543 State Route 21 Canandaigua, NY, 14427, on or about 5/1/24; SHARP-1860LV was operated without the guard in place for the rotating chuck.

Issued

Aug 15, 2024

Penalty

Initial $1,371 · Current $823 Reduced

General-duty citation text

29 CFR 1904.41(a)(2): The establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and the establishment was classified in an industry listed in appendix A to subpart E of this part, and the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA by the specified date:  a) Dennie's Manufacturing, 2543 State Route 21 Canandaigua, NY, 14427, on or about 3/2/2024; the employer failed to electronically submit information from their OSHA Form 300A or equivalent by 03/02/2024 for calendar year 2023. The establishment employed 35 employees and was classified under NAICS 332710 - Machine Shops during calendar year 2023.