HOUSTON, TX —
OSHA Inspection: AGRI-SYSTEMS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AGRI-SYSTEMS in 7300 WINGATE ST., HOUSTON, TX 77011 (NAICS 238290). OSHA activity number 347489510.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGRI-SYSTEMS
- Site address
- 7300 WINGATE ST.
- City
- HOUSTON
- State
- TX
- ZIP
- 77011
- Mailing
- 1300 MINNESOTA AVE., BILLINGS, MT 59101
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238290
- Employees
- 211
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.1417 A
- Issued
- Oct 10, 2024
- Abate by
- Oct 17, 2024
- Penalty
- Initial $14,518 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1417(a): The employer did not comply with all manufacturer procedures applicable to the operational functions of equipment, including its use with attachments: a) On or about May 16, 2024, at a silo construction site, a Liebherr Model LR1130.1 Lattice-boom Crawler crane was used without following the manufacturer's procedures for operations in high winds. b) On or about May 16, 2024, at a silo construction site, a Manitowoc Model 2250 Lattice-boom Crawler crane was used without following the manufacturer's procedures for operations in high winds.
Recent events (2)
- — I (S) $0
- — Z (S) $14518
1926.1417 H
- Issued
- Oct 10, 2024
- Abate by
- Oct 17, 2024
- Penalty
- Initial $14,518 · Current $14,518
General-duty citation text
29 CFR 1926.1417(h): When a local storm warning has been issued, the competent person did not determine whether it was necessary to implement manufacturer recommendations for securing the equipment: a) On or about May 16, 2024, at a silo construction site.
Recent events (2)
- — I (S) $14518
- — Z (S) $14518
1926.1427 A01
- Issued
- Oct 10, 2024
- Penalty
- Initial $10,372 · Current $6,223 Reduced
General-duty citation text
29 CFR 1926.1427(a)(1): An employee who had not been certified/licensed and evaluated to operate assigned equipment in accordance with this section, operated the equipment as an operator-in-training not under supervision in accordance with the requirements of paragraph (b) of this section: b) On or about May 16, 2024, at a silo construction site, an uncertified employee operated a Manitowoc Model 2250 Lattice-boom Crawler crane without being actively monitored and supervised by a trainer.
Recent events (2)
- — I (O) $6223.2
- — Z (S) $10372
1926.1427 B02
- Issued
- Oct 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1427(b)(2): The trainer did not continuously monitor the operator-in-training on site while operating equipment: a) On or about May 16, 2024, at a silo construction site, an uncertified employee operating a Manitowoc, Model 2250 Lattice-boom Crawler crane was not continuously monitored by a trainer.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.1427 B04
- Issued
- Oct 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1427(b)(4): The employer did not ensure that an operator-in-training was monitored in accordance with paragraphs (b)(4)(i)-(iv) when operating equipment covered by this subpart: a) On or about May 16, 2024, at a silo construction site, an uncertified employee operated a Manitowoc, Model 2250 Lattice-boom Crawler crane while the trainer performed other tasks that detracted from the trainer's monitoring responsibilities.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Agri-Systems
View Agri-Systems's full OSHA safety record →
More inspections in this industry (NAICS 238290)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347489510.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.