OSHA Inspection: JLM GENERAL CONSTRUCTION, LLC

Issued

Dec 2, 2024

Abate by

Dec 27, 2024

Penalty

Initial $388 · Current $388

General-duty citation text

29 CFR?1903.19(c)(1): The?employer did?not certify?to OSHA,?within 10?calendar days?after the?abatement date,?that the?cited violation?had been?abated:    JLM General Construction, LLC, failed?to certify?to OSHA?within 10?calendar days?after the?abatement date?that each?of the?following cited?violations had?been corrected:    Citation  ?Number????????????????Item Number????????????????????????Abatement Date  01??????????????????????                           ????01-a??????????                           10/22/2024  01?????????????????????? ??                           01-b?????????????????                       10/22/2024  01???????????????????                           ??????02???????????????????????                        10/22/2024   In?accordance with?29 CFR?1903.19(c), abatement?certification is?required for?this violation?(using the?CERTIFICATION OF?CORRECTIVE ACTION?WORKSHEET).

Issued

Sep 25, 2024

Abate by

Oct 22, 2024

Penalty

Initial $4,839 · Current $4,839

General-duty citation text

29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means:  a) On May 23, 2024, employees were exposed to electrical shock while working in close proximity to a 120/240 volt overhead power line.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Sep 25, 2024

Abate by

Oct 22, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1053(b)(12): Ladders used where the employee or the ladder could contact exposed energized electrical equipment did not have nonconductive side rails:   a) On May 23, 2024, employees were exposed to electrical shock while setting up and working from an aluminum extension ladder in close proximity to a 120/240 volt power line.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Sep 25, 2024

Abate by

Oct 22, 2024

Penalty

Initial $4,839 · Current $4,839

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  a) On May 23, 2024, employees performing roofing work were exposed to fall hazards of approximately 19 feet.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Sep 25, 2024

Abate by

Oct 22, 2024

Penalty

Initial $3,457 · Current $3,457

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) On or about May 23, 2024, employees were exposed to fall hazards while performing roofing work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Sep 25, 2024

Abate by

Oct 22, 2024

Penalty

Initial $3,457 · Current $3,457

General-duty citation text

29 CFR?1926.1053(b)(4): Ladder(s)?were used?for purposes?other than?the purpose?for which?they were?designed:??    a) On May 23, 2024, the extension?ladder was?used by?two employees?simultaneously, to?access and/or?egress the?roof.????    In accordance?with 29?CFR 1903.19(c),?abatement certification?is required?for this?violation (using?the CERTIFICATION?OF CORRECTIVE?ACTION WORKSHEET).

Issued

Sep 25, 2024

Abate by

Oct 22, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1053(b)(22): Employees using ladders were carrying objects or loads that could cause the employee to lose balance and fall:   a) On May 23, 2024, employees were exposed to fall hazards while carrying tools and roofing materials up an extension ladder.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).