OSHA Inspection: JLM GENERAL CONSTRUCTION, LLC

Issued

Feb 26, 2026

Abate by

Apr 14, 2026

Penalty

Initial $478 · Current $478

General-duty citation text

29 CFR  1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   a) JLM General Construction, LLC failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number		Item Number	Abatement Date 01		1	1/20/2026 01		2	1/20/2026 02		1	1/20/2026  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Dec 4, 2025

Abate by

Dec 31, 2025

Penalty

Initial $3,405 · Current $3,405

General-duty citation text

29 CFR  1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) On July 10, 2025, at the above addressed jobsite, employees were exposed to struck-by hazards from falling tools, material and debris when working below employees performing roofing work.  The employees were not wearing hard hats.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Dec 4, 2025

Abate by

Dec 31, 2025

Penalty

Initial $3,405 · Current $3,405

General-duty citation text

29 CFR  1926.102(a)(1): The employer did not ensure that each affected employee use appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors or potentially injurious light radiation.  a) On July 10, 2025, at the above addressed jobsite, employees were exposed to eye injury while operating pneumatic nailers without eye protection.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Dec 4, 2025

Abate by

Dec 31, 2025

Penalty

Initial $11,916 · Current $11,916

General-duty citation text

29 CFR  1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m)  or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502:   a) On July 10, 2025, at the above addressed jobsite, employees performing roofing work on a multi-unit complex, approximately 25 feet above the ground below, were not secured to personal fall arrest systems or other means of fall protection, thereby exposing the employees to fall hazards.    JLM General Construction, LLC was previously cited for a violation of this occupational safety and health standard 1926.501(b)(13), which was contained in OSHA inspection number 1750405, citation number 1, item number 2 and was affirmed as a final order on October 21, 2024, with respect to a workplace located at 595 Cedar Street in Winnetka, Illinois.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.