Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TITAN MACHINERY

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of TITAN MACHINERY in 14961 SHEPARD STREET, OMAHA, NE 68138 (NAICS 423820). OSHA activity number 347504805.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Titan Machinery — free Get an email when a new federal OSHA severe-injury report for Titan Machinery is published. One employer, no account, unsubscribe in one click.
Establishment
TITAN MACHINERY
Site address
14961 SHEPARD STREET
City
OMAHA
State
NE
ZIP
68138
Mailing
14961 SHEPARD STREET, OMAHA, NE 68138
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423820
Employees
2734
Ownership type
A

7 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 24, 2024
Penalty
Initial $10,140 · Current $6,591 Reduced
29 CFR  1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  Employees engaged in material handling operations located at 14961 Shepard Street, Omaha, Nebraska 68138 were exposed to struck-by hazards in that two employees did not successfully complete the required material handling training prior to operating Nissan Forklift MP1F2A25LV .  This was most recently documented on or about May 24th, 2024.
Recent events (2)
  • — I (S) $6591
  • — Z (S) $10140

1910.178 L06

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 24, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(6):The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:  Employees engaged in material handling operations located at 14961 Shepard Street, Omaha, Nebraska 68138 were exposed to struck-by  hazards in that the employer failed to certify in writing that two employees successfully completed forklift training. This was most recently documented on or about May 24th, 2024.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.184 C07

Serious Gravity 10 1 instance 2 exposed
Issued
Jun 24, 2024
Abate by
Jul 19, 2024
Penalty
Initial $16,131 · Current $10,485 Reduced
29 CFR  1910.184(c)(7):Sling(s) were not padded or protected from sharp edges of their loads:  Employees engaged in material handling operations located at 14961 Shepard Street, Omaha, Nebraska 68138, in the welding bay,  were exposed to struck-by hazards in that two employees rigged a nylon strap through a hole located on a grapple attachment - The sling used was not padded or protected from sharp edges.  The sling used failed and struck an employee.  This was most recently documented on or about May 24th, 2024.
Recent events (2)
  • — I (S) $10485.15
  • — Z (S) $16131

1910.184 C09

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 24, 2024
Abate by
Jul 19, 2024
Penalty
Initial $16,131 · Current $10,485 Reduced
29 CFR  1910.184(c)(9):All employees shall be kept clear of loads about to be lifted and of suspended loads.  Employees engaged in material handling operations located at 14961 Shepard Street, Omaha, Nebraska 68138, were exposed to struck-by hazards in that a rigged nylon sling that was suspended in the air and holding a  grapple attachment  for an excavator that was going to be welded, fell and  struck an employee.   This was most recently documented on or about May 24th, 2024.
Recent events (2)
  • — I (S) $10485.15
  • — Z (S) $16131

1910.184 D

Serious Gravity 10 1 instance 2 exposed
Issued
Jun 24, 2024
Abate by
Jul 19, 2024
Penalty
Initial $16,131 · Current $10,485 Reduced
29 CFR  1910.184(d):Each day before being used, the sling and all fastenings and attachments were not being inspected for damage or defects by a competent person designated by the employer:  Employees engaged in material handling operations located at 14961 Shepard Street, Omaha, Nebraska 68138 were exposed to struck-by hazards in that the employer failed to appoint a person to inspect slings prior to use.  This was most recently documented  on or about May 24th, 2024,  after an employee was struck due to a sling failing.
Recent events (2)
  • — I (S) $10485.15
  • — Z (S) $16131

1910.184 H05 V

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 24, 2024
Abate by
Jul 19, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.184(h)(5)(v):Natural or synthetic fiber rope sling(s) with discoloration or rotting were not immediately removed from service:  Employees engaged in material handling operations located at 14961 Shepard Street, Omaha, Nebraska 68138, were exposed to struck-by hazard in that an employee used a discolored nylon sling for rigging a grapple attachment in the welding bay.  The discolored nylon sling failed when suspended and struck and employee in the leg.  This was most recently documented on or about May 24th, 2024.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.184 C14

Other-than-serious 1 instance 1 exposed
Issued
Jun 24, 2024
Abate by
Jul 19, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.184(c)(14):29 CFR 1910.184(c)(14):  Employers used slings without affixed and legible identification markings.  Employees engaged in material handling operations located at 14961 Shepard Street, Omaha, Nebraska 68138, were exposed to struck-by hazards in that a nylon sling that did not contain a legible identification marking was used and failed.  This was most recently documented on or about May 24th, 2024.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Titan Machinery's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347504805.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.