SAN MIGUEL, CA —
OSHA Inspection: CAMP ROBERTS MATES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CAMP ROBERTS MATES in BLDG. 25021 EAST GARRISON, SAN MIGUEL, CA 93451 (NAICS 928110). OSHA activity number 347646358.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAMP ROBERTS MATES
- Site address
- BLDG. 25021 EAST GARRISON
- City
- SAN MIGUEL
- State
- CA
- ZIP
- 93451
- Mailing
- BLDG. 25021 EAST GARRISON, SAN MIGUEL, CA 93451
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 928110
- Employees
- 15
- Ownership type
- D
Citations
7 citations on file for this inspection.
1910.178 Q07
- Issued
- Aug 20, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: Building 25011, Warehouse: On and/or before July 24th, 2024, the Daewo BC205-2 Forklift was not examined before being placed in service. Employee(s) were potentially exposed to amputation and/or struck-by-hazard(s).
Recent events (1)
- — Z (S) $0
1910.212 A03 II
- Issued
- Aug 20, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s) Building 25021, Welding Shop: On and/or before July 24, 2024, points of operation on an in house manufactured band saw was not guarded to prevent employee(s) from having any part of their body in the danger zone during cutting operations. Employee(s) were potentially exposed to amputation hazard(s).
Recent events (1)
- — Z (S) $0
1910.219 D01
- Issued
- Aug 20, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Building 25021, Welding Shop: On and/or before July 24, 2024, all exposed parts such as the two aft pulleys and belt on an in house manufactured band saw was not guarded to prevent employee(s) from having any part of their body in the danger zone during cutting operations. Employee(s) were potentially exposed to nip point hazard(s).
Recent events (1)
- — Z (S) $0
1910.303 B02
- Issued
- Aug 20, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On and/or before July 24, 2024, multiple electrical equipment such as extension cords and laptops were plugged into relocatable power taps and/or daisy chained in which were not used according to listing and labeling instructions. This condition potentially exposed employee(s) to electrical shock and/or fire hazards. In the following locations: a) Building 25021, Automotive shop, bay three, a black extension cord was plugged into a Tripp-Lite relocatable power tap which provided power to Logitech speaker system. b) Building 25021, Automotive shop, south wing, a black laptop was plugged into a white relocatable power tap, which was plugged into a power strip, and also provided power to a Milwaukee radio/speaker. This electrical equipment was daisy chained and plugged into a retractable extension cord. c) Building 25011, Warehouse, A portable Evaporative Cooler model PAC2K363S was not used in accordance with listing and labeling instructions, it was connected to a black extension cord and not GFCI rated.
Recent events (1)
- — Z (S) $0
1910.303 B07 IV
- Issued
- Aug 20, 2024
- Abate by
- Sep 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There were damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action or overheating. Building 25011, Warehouse: On and/or before July 24, 2024, the Power factor model no. FPS24-600B PF-1 power pendant used to charge the Daewo BC205-2 Forklift was cracked and missing pieces. Employee(s) were potentially exposed to electrical hazard(s).
Recent events (1)
- — Z (S) $0
1960.8 A
- Issued
- Aug 20, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1960.8(a): The Agency head did not furnish employment and a place of employment to each employee that were free from recognized hazards that caused or were likely to cause death or serious physical harm: Building 25011, Warehouse: On and/or before July 24, 2024, employee(s) were loading/unloading industrial rack system(s). The bases of the industrial rack system(s) were not anchored with anchor bolts to the concrete floor. This condition exposed employee(s) to rack system(s) potentially tipping over creating crushing hazard(s).
Recent events (1)
- — Z (S) $0
1910.101 B
- Issued
- Aug 20, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6: Building 25011, Warehouse: On and/or before July 24th, 2024, four empty oxygen cylinders were unsecured and stored horizontally on top of a pallet for a period of 3 months and not secured to prevent falling. Employee(s) were potentially exposed to struck-by-hazard(s). Camp Roberts Mates was previously cited for a violation of this occupational safety and health standard or its equivalent standard, which was contained in OSHA inspection number 1579170, citation number 1, item number 1 and was affirmed as a final order on April 08, 2022 with respect to a workplace located at Bldg. 25021 East Garrison SAN MIGUEL, CA 93451.
Recent events (1)
- — Z (R) $0
More inspections at Camp Roberts Mates
View Camp Roberts Mates's full OSHA safety record →
More inspections in this industry (NAICS 928110)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347646358.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.