Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COMMERCIAL TIRE & RECAPPING CO., INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of COMMERCIAL TIRE & RECAPPING CO., INC. in 20 BIDWELL ROAD, SOUTH WINDSOR, CT 06074 (NAICS 326212). OSHA activity number 347664054.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Commercial Tire & Recapping CO., INC. — free Get an email when a new federal OSHA severe-injury report for Commercial Tire & Recapping CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
20 BIDWELL ROAD
City
SOUTH WINDSOR
State
CT
ZIP
06074
Mailing
20 BIDWELL ROAD, SOUTH WINDSOR, CT 06074
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326212
Employees
9
Ownership type
A

5 citations on file for this inspection.

1910.132 A

Serious Gravity 1 1 instance 4 exposed
Issued
Sep 3, 2024
Abate by
Oct 21, 2024
Penalty
Initial $2,765 · Current $1,383 Reduced
29 CFR  1910.132(a):  Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered:  Facility:  On, or about, August 2, 2024, the hot mill gloves provided for loading/unloading tires into the curing furnace did not cover employee's forearms.
Recent events (2)
  • — I (S) $1382.5
  • — Z (S) $2765

1910.132 D01

Serious Gravity 1 1 instance 9 exposed
Issued
Sep 3, 2024
Abate by
Oct 21, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.132(d)(1):  The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):  Facility:  On, or about, August 2, 2024, the employer had not conducted a Hazard Assessment to determine what personal protective equipment was necessary to prevent injuries to employees while performing tasks in the facility.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 B07 IV

Serious Gravity 1 1 instance 9 exposed
Issued
Sep 3, 2024
Penalty
Initial $2,350 · Current $1,175 Reduced
29 CFR  1910.303(b)(7)(iv):  There were damaged parts that adversely affected safe operation or mechanical strength of the equipment, such as parts that were broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating:  Break Room:  On, or about, August 2, 2024, a relocatable power tap used to energize a microwave oven and a coffee maker was damaged.  The housing was broken, exposing the inner components and the power cord was pulled from the plug fitting.
Recent events (2)
  • — I (S) $1175
  • — Z (S) $2350

1910.178 L01 I

Other-than-serious 1 instance 2 exposed
Issued
Sep 3, 2024
Abate by
Oct 21, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(1)(i):  The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  Facility:  On, or about, August 2, 2024, the employer did not provide training to employees who operated the Toyota forklift.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 P01

Other-than-serious 1 instance 2 exposed
Issued
Sep 3, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.178(p)(1):  Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition:  Facility:  On, or about, August 2, 2024, the swing out tank rack provided on Toyota forklift serial number 67353 did not match the size LPG tank used, so tie-downs were used to give the tank extra support.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347664054.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.