Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WISCONSIN POLYMERS LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of WISCONSIN POLYMERS LLC in 111 NORTH DOUGLAS STREET, HORTONVILLE, WI 54944 (NAICS 423930). OSHA activity number 347701013.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Wisconsin Polymers LLC — free Get an email when a new federal OSHA severe-injury report for Wisconsin Polymers LLC is published. One employer, no account, unsubscribe in one click.
Site address
111 NORTH DOUGLAS STREET
City
HORTONVILLE
State
WI
ZIP
54944
Mailing
1800 W ROGERS AVE, APPLETON, WI 54914
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423930
Employees
7
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 3 instances 3 exposed
Issued
Sep 4, 2024
Abate by
Sep 18, 2024
Penalty
Initial $3,457 · Current $2,420 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:   On or about August 21, 2024, at a workplace located at 111 North Douglas Street, Hortonville, Wisconsin in the production area; an employee was exposed to a fall hazard while working from a platform that was not designed and constructed to safely support personnel and was not attached to the forks to prevent falls to lower levels while the pallet was elevated by the forks of a powered industrial vehicle. The employee was exposed to a fall hazard over eight feet to the floor below.   On or about August 2, 2024, at a workplace located at 111 North Douglas Street, Hortonville, Wisconsin in the production area; employees were exposed to fall hazards while working from a platform that was not designed and constructed to safely support personnel and was not attached to the forks to prevent falls to lower levels while the pallet was elevated by the forks of a powered industrial vehicle. The employees were exposed to fall hazards over ten feet to the floor below.   On or about July 25, 2024, at a workplace located at 111 North Douglas Street, Hortonville, Wisconsin on the exterior of the building; an employee was exposed to a fall hazard while working from a platform that was not designed and constructed to safely support personnel and was not attached to the forks to prevent a fall to lower levels while the pallet was elevated by the forks of a powered industrial vehicle; The employee was exposed to a fall hazard over ten feet to the floor below.
Recent events (2)
  • — I (S) $2419.9
  • — Z (S) $3457

1910.28 B01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 4, 2024
Abate by
Sep 18, 2024
Penalty
Initial $2,765 · Current $1,936 Reduced
29 CFR  1910.28(b)(1)(i): Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:    On or about August 20, 2024, at a workplace located at 111 North Douglas Street, Hortonville, in the Production Area; employees standing on the metal sorting table positioned in front of the shredder conveyor were not protected from a fall hazard of four feet.
Recent events (2)
  • — I (S) $1935.5
  • — Z (S) $2765

1910.147 F03 II D

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 4, 2024
Abate by
Sep 18, 2024
Penalty
Initial $2,765 · Current $1,936 Reduced
29 CFR  1910.147(f)(3)(ii)(D): Each authorized employee shall affix a personal lockout or tagout device to the group lockout device, group lockbox, or comparable mechanism when he or she begins work, and shall remove those devices when he or she stops working on the machine or equipment being serviced or maintained:   On or about August 21, 2024, at a workplace located at 111 North Douglas Street, Hortonville, WI in the Production Area; each employee engaged in a servicing task of removing a heater assembly from the extruder did not affix a personal lockout device to the energy disconnect.
Recent events (2)
  • — I (S) $1935.5
  • — Z (S) $2765

View Wisconsin Polymers LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347701013.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.