Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RAIL MODAL GROUP LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of RAIL MODAL GROUP LLC in 549 EAST COUNTY ROAD T, FREMONT, NE 68025 (NAICS 424510). OSHA activity number 347816753.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rail Modal Group LLC — free Get an email when a new federal OSHA severe-injury report for Rail Modal Group LLC is published. One employer, no account, unsubscribe in one click.
Site address
549 EAST COUNTY ROAD T
City
FREMONT
State
NE
ZIP
68025
Mailing
12 CORNELL ROAD, LATHAM, NY 12110
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424510
Employees
39
Ownership type
A

12 citations on file for this inspection.

1910.134 K06

Other-than-serious Gravity 1 1 instance 3 exposed
Issued
Mar 12, 2025
Abate by
Apr 16, 2025
Penalty
Initial $6,384 · Current $1,699 Reduced
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  On or about November 29, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance department of Rail Modal Group, LLC located at 549 East County Road T, Fremont, Nebraska were exposed to respiratory hazards in that employees who wore N-95 masks to protect against particles and fumes generated during grinding and welding on mild steel were not provided the information included in Appendix D of �1910.134.
Recent events (2)
  • — I (O) $1699
  • — Z (S) $6384

1910.177 C01

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 12, 2025
Abate by
Apr 16, 2025
Penalty
Initial $14,895 · Current $14,895
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels:  On or about September 24, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance building of Rail Modal Group LLC located at 549 County Road T, Fremont, Nebraska were exposed to struck-by hazards in that the employer did not develop and implement a rim wheel service training program for employees performing single-piece rim wheel servicing.
Recent events (2)
  • — I (S) $14895
  • — Z (S) $14895

1910.177 C02

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 12, 2025
Abate by
Apr 16, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.177(c)(2): The employer did not assure that each employee demonstrated his ability to safely service rim wheels by effective performance of all tasks listed in 29 CFR 1910.177(c)(2)(i) through (viii):  On or about September 24, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance building of Rail Modal Group LLC located at 549 East County Road T, Fremont, Nebraska were exposed to struck-by hazards in that the employer did ensure employees' ability to safely service single-piece rim wheels was demonstrated prior to performing such service.  Instances included all tasks as required by and listed in ��1910.177(c)(2)(i) - (viii).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 C03

Deleted Serious Gravity 10 2 instances 2 exposed
Issued
Mar 12, 2025
Abate by
Apr 16, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.177(c)(3): The employer did not evaluate each employee's ability to service rim wheels safely:  On or about September 24, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance building of Rail Modal Group, LLC located at 549 County Road T, Fremont, Nebraska were exposed to struck-by hazards in that the employer did not evaluate each employee's ability to service single-piece semi-truck rim wheels safely.  Instances included, but were not limited to:  i. On or about September 24, 2024, where employees serviced 255 and 295 R75 single-piece semi-truck rim wheels from the ground outside of a restraining device and ii. On or about December 3, 2024, where employees serviced 255 and 295 R75 single-piece semi-truck rim wheels in a tire cage without a barrier.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 D02

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 12, 2025
Penalty
Initial $14,895 · Current $14,895
29 CFR 1910.177(d)(2): The employer did not provide a restraining device or a barrier to be used when inflating tires on single piece rim wheels which are not bolted onto the vehicles:   On or about September 24, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance building of Rail Modal Group LLC located at 549 East County Road T, Fremont, Nebraska were exposed to struck-by hazards in that the employees inflated 255 and 295 R275 tires on single-piece semi-truck rim wheels either while freestanding upright on the tire tread or laid flat on the ground.
Recent events (2)
  • — I (S) $14895
  • — Z (S) $14895

1910.177 D04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 12, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.177(d)(4)(i): The employer did furnish and not assure that employees used a clip-on chuck when inflating tires on rim wheels:  On or about September 24, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance building of Rail Modal Group LLC located at 549 East County Road T, Fremont, Nebraska were exposed to struck-by hazards in that the employer did not provide and/or ensure use of clip-on chucks when servicing 255 and 295 R75 semi-truck tires on single-piece rim wheels.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 D04 II

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 12, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.177(d)(4)(ii): The employer did not furnish and assure that employees used an in-line valve with pressure gauge or a presettable regulator when inflating tires on rim wheels:  On or about September 24, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance building of Rail Modal Group LLC located at 549 East County Road T, Fremont, Nebraska were exposed to struck-by hazards in that the employer did provide and/or ensure use of an in-line value with pressure gauge or a presettable regulator when servicing 255 and 295 R75 semi-truck tires on single-piece rim wheels.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 D05

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Mar 12, 2025
Abate by
Apr 16, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.177(d)(5): Current charts (rim manuals) containing instructions for the type of wheels being serviced were not available in the service area:  On or about December 3, 2024, it was documented that employees engaged in wheel servicing activities in the maintenance department of Rail Modal Group, LLC located at 549 East County Road T, Freemont, Nebraska were exposed to struck-by hazards in that the employer did not make available in the service area current charts, rim manuals, and/or other information containing instructions for servicing 255 and 295 R275 tires on single-piece semi-truck rim wheels.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 G

Deleted Serious Gravity 10 4 instances 2 exposed
Issued
Mar 12, 2025
Abate by
Apr 16, 2025
Penalty
Initial $14,895 · Current $0 Reduced
29 CFR 1910.177(g): The employer did not establish a safe operating procedure for servicing single-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(g)(1) through (12):  On or about September 24, 2024, it was documented that employees performing wheel servicing activities in the maintenance department of Rail Modal Group, LLC located at 549 County Road T, Freemont, Nebraska were exposed to struck-by hazards in that the employer did not establish and implement safe operating procedures(s) for single-piece rim wheel servicing that included, but were not limited to:  i. Only inflating tires when contained within a restraining device, positioned behind a barrier, or bolted to the vehicle with the lug nuts fully tightened, ii.  Tires shall not be inflated when any flat, solid surface is in the trajectory and within one foot of the side wall,  iii. Employees shall stay out of the trajectory when inflating a tire, and  iv. Tires shall not be inflated above the maximum pressure necessary recommended by the manufacturer to seat the tire bead firmly against the rim
Recent events (2)
  • — I (S) $0
  • — Z (S) $14895

1910.178 Q01

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Mar 12, 2025
Abate by
Apr 1, 2025
Penalty
Initial $6,384 · Current $0 Reduced
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel:  On or about October 15, 2024, it was documented that employees performing material handling activities in the yard at Rail Modal Group located at 549 East County Road T, Freemont, Nebraska were exposed to fall hazards in that the Taylor, model TECDS-150H, serial number S-K7-22720 had structural damage along the entrance stairway to the truck where the stair guardrail parts were separating at the junctures either in whole or in part.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6384

1910.178 Q06

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 12, 2025
Abate by
Apr 1, 2025
Penalty
Initial $8,511 · Current $8,511
29 CFR 1910.178(q)(6): Powered industrial trucks were altered so that the relative positions of the various parts were different from what they were when originally received from the manufacturer, by the addition of extra parts not provided by the manufacturer, or by the elimination of any parts without the manufacturer's approval:  On or about October 15, 2024, it was documented that employees engaged in material handling in the yard of Rail Modal Group located at 549 East County Road T, Freemont, Nebraska were exposed to struck-by hazards in that employees operated the Terex Yard Master 05, model HR45-25, serial number TFC45170904 in which the steering wheel was duct taped to replace a mounting pin.
Recent events (2)
  • — I (S) $8511
  • — Z (S) $8511

1910.252 B02 III

Other-than-serious 1 instance 2 exposed
Issued
Mar 12, 2025
Abate by
Apr 1, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:  On or about November 29, 2024, it was documented that employees engaged in maintenance activities in the maintenance building of Rail Modal Group, LLC located at 549 County Road T, Freemont, Nebraska were exposed to ocular hazards in employees working or present in work bay were not protected from welding rays by screens or shields.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Rail Modal Group LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347816753.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.