Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ASC ENGINEERED SOLUTIONS, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ASC ENGINEERED SOLUTIONS, LLC in 160 FRENCHTOWN ROAD, NORTH KINGSTOWN, RI 02852 (NAICS 332999). OSHA activity number 347837114.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ASC Engineered Solutions, LLC — free Get an email when a new federal OSHA severe-injury report for ASC Engineered Solutions, LLC is published. One employer, no account, unsubscribe in one click.
Site address
160 FRENCHTOWN ROAD
City
NORTH KINGSTOWN
State
RI
ZIP
02852
Mailing
160 FRENCHTOWN ROAD, NORTH KINGSTOWN, RI 02852
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
150
Ownership type
A

5 citations on file for this inspection.

1910.22 C

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 11, 2025
Abate by
May 28, 2025
Penalty
Initial $11,055 · Current $7,739 Reduced
29 CFR 1910.22(c): The employer did not provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces.  a) Steel racking system and surrounding area servicing the burning table located between columns Q19 and P19 - On or about 10/15/2024, employees were exposed to caught in between and slip, trip, and fall hazards, while stepping onto a floor racking system approximately 30-inches in height, with an approximate 6-inch wide top surface, between heavy steel plates to attach crane rigging, and the employer does not provide a safe and appropriate means of access to and from this walking-working surface.
Recent events (2)
  • — I (S) $7738.5
  • — Z (S) $11055

1910.135 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 11, 2025
Abate by
May 28, 2025
Penalty
Initial $11,055 · Current $7,739 Reduced
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects.  a) C-36 Crane area servicing the burning table located between columns Q19 and P19 - On or about 10/15/2024, employees were exposed to struck by hazards due to operating cranes with overhead hazards and the employer did not provide employees with proper head protection.
Recent events (2)
  • — I (S) $7738.5
  • — Z (S) $11055

1910.176 B

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 11, 2025
Abate by
May 28, 2025
Penalty
Initial $15,474 · Current $10,832 Reduced
29 CFR 1910.176(b): Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse.  (a) Steel racking system and surrounding area servicing the burning table located between columns Q19 and P19 - On or about 10/15/2024, employees were exposed to struck by and crushing hazards from steel plates being stored vertically in a floor rack, where they were not adequately secured or limited in height to prevent them from sliding and falling out of the rack.
Recent events (2)
  • — I (S) $10831.8
  • — Z (S) $15474

1910.179 N03 III B

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Apr 11, 2025
Abate by
May 28, 2025
Penalty
Initial $15,474 · Current $0 Reduced
29 CFR 1910.179(n)(3)(iii)(b): During hoisting, the load contacted obstructions.    (a) C-36 Crane area servicing the burning table located between columns Q19 and P19 - On or about 10/15/2024 an employee was exposed to crushing and struck by hazards when a hoisted load came in contact, and knocking over, an adjacent steel plate that was stored vertically in the floor storage rack system.
Recent events (2)
  • — I (S) $0
  • — Z (S) $15474

1910.179 L03 III A

Other-than-serious 1 instance 2 exposed
Issued
Apr 11, 2025
Abate by
May 28, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.179(l)(3)(iii)(a): Crane hooks showing defects described in paragraph (j)(2)(iii) of this section were not be discarded.  a) Shepard Niles Crane C-36 Hook - On or about 10/15/024, employees were exposed to struck by hazards due to a crack in the gate mechanism on the crane hook.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View ASC Engineered Solutions, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347837114.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.