WAXAHACHIE, TX —
OSHA Inspection: FRANCISCO SALAZAR
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FRANCISCO SALAZAR in 2233 SCISSORTAIL STREET, WAXAHACHIE, TX 75165 (NAICS 238130). OSHA activity number 347849036.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRANCISCO SALAZAR
- Site address
- 2233 SCISSORTAIL STREET
- City
- WAXAHACHIE
- State
- TX
- ZIP
- 75165
- Mailing
- 1244 ARROWHEAD DRIVE, IRVING, TX 75060
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Jan 6, 2025
- Abate by
- Jan 15, 2025
- Penalty
- Initial $2,765 · Current $2,765
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: On or about October 2, 2024, at 2233 Scissortail Street, in Waxahachie, Texas, employees were not protected by wearing hardhats while working below other employees that were installing cornice.
Recent events (1)
- — Z (S) $2765
1926.102 A01
- Issued
- Jan 6, 2025
- Abate by
- Jan 15, 2025
- Penalty
- Initial $5,531 · Current $5,531
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. On or about October 2, 2024, at 2233 Scissortail Street in Waxahachie, Texas, employees operated Metabo nail guns to install cornice without eye and face protection with flying objects hazards. Francisco Salazar was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.102(a)(1), which was contained in OSHA inspection number 1740791, Citation Number 1, Item number 1, and was affirmed as a final order on May 14, 2024, with a final abatement date on April 23, 2024, with respect to a workplace located at 332 Palo Duro Street, Waxahachie, TX 75165.
Recent events (1)
- — Z (R) $5531
1926.501 B13
- Issued
- Jan 6, 2025
- Abate by
- Jan 15, 2025
- Penalty
- Initial $9,679 · Current $9,679
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest system. On or about October 2, 2024, at 2233 Scissortail Street in Waxahachie, Texas, where employees performed cornice work from a height of more than 6-feet above the ground. Francisco Salazar was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1740791, Citation Number 1, Item number 2, and was affirmed as a final order on May 14, 2024, with a final abatement date on April 23, 2024, with respect to a workplace located at 332 Palo Duro Street, Waxahachie, TX 75165.
Recent events (1)
- — Z (R) $9679
1926.503 A01
- Issued
- Jan 6, 2025
- Abate by
- Jan 15, 2025
- Penalty
- Initial $1,382 · Current $1,382
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: On or about October 2, 2024, at 2233 Scissortail Street in Waxahachie, Texas, employees installed cornice material were not provided a fall protection training program with hazard recognition and avoidance training where part of the job was to be potentially exposed to fall hazards of more than 6-feet to the ground below. Francisco Salazar was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.503(a)(1), which was contained in OSHA inspection number 1740791, Citation Number 2, Item number 1, and was affirmed as a final order on May 14, 2024, with a final abatement date on April 23, 2024, with respect to a workplace located at 332 Palo Duro Street, Waxahachie, TX 75165.
Recent events (1)
- — Z (R) $1382
More inspections at Francisco Salazar
View Francisco Salazar's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347849036.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.