TALLASSEE, AL —
OSHA Inspection: YESAC CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of YESAC CORP. in 40 YESAC DRIVE, TALLASSEE, AL 36078 (NAICS 332999). OSHA activity number 347851420.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YESAC CORP.
- Site address
- 40 YESAC DRIVE
- City
- TALLASSEE
- State
- AL
- ZIP
- 36078
- Mailing
- 40 YESAC DRIVE, TALLASSEE, AL 36078
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 55
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.133 A01
- Issued
- Feb 5, 2025
- Abate by
- Feb 13, 2025
- Penalty
- Initial $5,627 · Current $3,376 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Grinding Area; On or about October 30, 2024, and at times prior thereto, the employer exposed employees to struck-by hazards in that employees were allowed to engage in grinding activities without first being require to wear eye or face protection.
Recent events (2)
- — I (S) $3376.2
- — Z (S) $5627
1910.212 A03 II
- Issued
- Feb 5, 2025
- Abate by
- Feb 18, 2025
- Penalty
- Initial $7,035 · Current $4,221 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Behind Rack Assembly Area: On or about October 30, 2024, and at times prior thereto, the employer exposed employees to amputation hazards in that employees were allowed to utilize a 14-inch chop saw without the guard in place.
Recent events (2)
- — I (S) $4221
- — Z (S) $7035
1910.252 B02 I C
- Issued
- Feb 5, 2025
- Abate by
- Feb 13, 2025
- Penalty
- Initial $7,035 · Current $4,221 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(i)(C): All operators and attendants of resistance welding or resistance brazing equipment did not use transparent face shields or goggles, depending on the particular job, to protect their faces or eyes, as required: a) Rack Assembly Area: On or about October 30, 2024, and at times prior thereto, the employer exposed employees to retinal damage in that welders were allowed to engage in welding activities without being required to wear eye protection.
Recent events (2)
- — I (S) $4221
- — Z (S) $7035
1910.252 B02 III
- Issued
- Feb 5, 2025
- Abate by
- Feb 18, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: a) Rack Assembly Area: On or about October 30, 2024, and at times prior thereto, the employer exposed employees to retinal damage in the the employer did not enclose the welding area with noncombustible or flameproof screens or shields.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.252 B03
- Issued
- Feb 5, 2025
- Abate by
- Feb 18, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(b)(3): Employees exposed to the hazards created by welding, cutting, or brazing operations were not protected by personal protective equipment in accordance with the requirements of 29 CFR 1910.132: a) Rack assembly Area: On or about October 30, 2024, and at times prior thereto, employees who assist the welder are not required to wear fire-resistant, long-sleeved shirts to protect them from the effects of weld glare and sparks created by the welding process.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Yesac Corp.
View Yesac Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347851420.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.