DALTON, GA —
OSHA Inspection: GARLAND SALES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GARLAND SALES, INC. in 1800 ANTIOCH RD., DALTON, GA 30721 (NAICS 314110). OSHA activity number 347895914.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GARLAND SALES, INC.
- Site address
- 1800 ANTIOCH RD.
- City
- DALTON
- State
- GA
- ZIP
- 30721
- Mailing
- 1800 ANTIOCH RD., DALTON, GA 30721
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314110
- Employees
- 250
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Feb 19, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $14,187 · Current $14,187
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Building C, Rug Roller machine; On or about November 13, 2024, and at times prior, the employer exposed employees to caught-in hazards, in that the employer had no instructions for LOTO for the Automatic Rug Roller machine.
Recent events (1)
- — Z (S) $14187
1910.212 A03 II
- Issued
- Feb 19, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $16,550 · Current $16,550
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Building C, Rug Roller machine; On or about November 13, 2024, and at times prior, the employer exposed employees to caught-in hazards, in that the guarding for the rug roller was not designed in a manner that would prevent employees being exposed to moving parts at the point of operation during the operating cycle.
Recent events (1)
- — Z (S) $16550
1910.305 A02 II
- Issued
- Feb 19, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(a)(2)(ii): Temporary wiring was not removed immediately upon completion of the project or purpose for which the wiring was installed: (a) Building C, Rug Roller machine; On or about November 20, 2024, and at times prior, the employer exposed employees to electric shock hazards, in that the employer provided an extension cord to power a pedestal floor fan in lieu of providing permanent wiring with an outlet at the point of operation.
Recent events (1)
- — Z (O) $0
1910.305 B01 I
- Issued
- Feb 19, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: (a) Building C, Rug Roller machine; On or about November 20, 2024, and at times prior, the employer exposed employees to electric shock hazards, in that the electrical conduit fitting was not properly connected to the box.
Recent events (1)
- — Z (O) $0
1910.305 B01 II
- Issued
- Feb 19, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) Building C, Rug Roller machine; On or about November 20, 2024, and at times prior, the employer exposed employees to electrical shock hazards, in that the wall mounted junction box had an exposed opening from a missing knockout thereby exposing nearby employees.
Recent events (1)
- — Z (O) $0
More inspections at Garland Sales, INC.
View Garland Sales, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 314110)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347895914.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.