IRVINGTON, NJ —
OSHA Inspection: PLASTIC USA, LLC.
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of PLASTIC USA, LLC. in 34 LORETTO STREET, IRVINGTON, NJ 07111 (NAICS 326199). OSHA activity number 347916371.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PLASTIC USA, LLC.
- Site address
- 34 LORETTO STREET
- City
- IRVINGTON
- State
- NJ
- ZIP
- 07111
- Mailing
- 34 LORETTO STREET, IRVINGTON, NJ 07111
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 4, 2025
- Abate by
- Jul 17, 2025
- Penalty
- Initial $6,620 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Location: 34 Loretto Street, Irvington, NJ 07111. a: The employer failed to develop, document and utilize procedures for the control of potentially hazardous energy during cleaning activities on machines. An employee was exposed to crushing hazards while cleaning an Airtech vacuum pump without taking measures to prevent inadvertent exposure to residual energy after shutting the pump off. Violation occurred on or about 12/05/2024.
Recent events (2)
- — I (S) $5000
- — Z (S) $6620
1910.147 D04 I
- Issued
- Jun 4, 2025
- Abate by
- Jul 17, 2025
- Penalty
- Initial $6,620 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: Location: 34 Loretto Street, Irvington, NJ 07111 - Production Area a: An employee was exposed to crushing hazards while cleaning an Airtech Vacuum pump when failing to apply a lockout device to a switch on the electrical control panel to prevent inadvertent machine start up. b: An employee was exposed to crushing hazards while cleaning/unjamming two heavy duty trim press machines without applying a lockout device to a switch on the electrical control panel to prevent inadvertent machine start up. Violation occurred on or about 12/05/2024.
Recent events (2)
- — I (S) $5000
- — Z (S) $6620
1910.303 B01 IV
- Issued
- Jun 4, 2025
- Abate by
- Jul 17, 2025
- Penalty
- Initial $4,729 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(iv): Electric equipment was not free from recognized hazards that were likely to cause serious physical harm to employees, such as damaged electrical insulation: Location: 34 Loretto Street, Irvington, NJ 07111 - Production area a: The employer failed to ensure electrical equipment were hazards-free. An employee was exposed to up to 480V electric shock while using/cleaning an Airtech vacuum pump with damaged/exposed insulation. Violation occurred on or about 12/05/2024.
Recent events (2)
- — I (S) $3000
- — Z (S) $4729
1910.37 B05
- Issued
- Jun 4, 2025
- Abate by
- Jul 17, 2025
- Penalty
- Initial $7,566 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g. closet): Location: 34 Loretto Street, Irvington, NJ 07111 - Production Area a: The employer failed to ensure that employees were protected from hazards that included but not limited to smoke inhalation for not displaying a "Not An Exit Sign" on or near a door which was not an exit in the production area. Violation occurred on or about 12/05/2024. Plastic USA, LLC DBA Plastico Products, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.37(b)(5), which was contained in OSHA inspection number 1582064, citation number 1, item number 2 and was affirmed as a final order on August 19, 2022, with respect to a workplace located at 34 Loretto Street, Irvington, NJ 07111.
Recent events (2)
- — I (R) $5000
- — Z (R) $7566
More inspections at Plastic USA, LLC.
View Plastic USA, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347916371.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.