AURORA, CO ·
OSHA Inspection: STONE CITY, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of STONE CITY, LLC in 1620 SOUTH ABILENE STREET, UNIT G, AURORA, CO 80012 (NAICS 327991). OSHA activity number 347961419.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STONE CITY, LLC
- Site address
- 1620 SOUTH ABILENE STREET, UNIT G
- City
- AURORA
- State
- CO
- ZIP
- 80012
- Mailing
- 1620 SOUTH ABILENE STREET, UNIT G, AURORA, CO 80012
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 6
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.300 B04 II
- Issued
- Feb 28, 2025
- Abate by
- Mar 28, 2025
- Penalty
- Initial $2,837 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.300(b)(4)(ii): The point of operation of machine(s) whose operation exposed an employee to injury was not guarded: a) 1602 S Abilene St, Unit G: On or about January 6, 2025, and at times prior, employees were exposed to laceration hazards from the point of operation of cutting wheels while using Metabo 6" handheld grinders (Model#: WN 0356) without safety guards to cut stone countertops.
Recent events (2)
- · I (S) $1400
- · Z (S) $2837
1910.334 A02 II
- Issued
- Feb 28, 2025
- Penalty
- Initial $4,256 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage to a flexible cord that could have exposed an employee to injury and the defective or damaged item was not removed from service: a)1602 S Abilene St, Unit G: On or about January 6, 2025, and at times prior, the employer did not ensure that damaged flexible cords used to power polishing tools were removed from service. This condition exposed employees to electrical shock hazards.
Recent events (2)
- · I (S) $1400
- · Z (S) $4256
1910.178 A05
- Issued
- Feb 28, 2025
- Abate by
- Mar 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) 1602 S Abilene St, Unit G: On or about January 6, 2025, and at times prior, the employer did not ensure that forklifts with boom attachments used to lift stone slabs were marked with the attachment information as required by this standard.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1053 D01
- Issued
- Feb 28, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1053(d)(1): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section: a)1602 S Abilene St, Unit G: On or about January 6, 2025, and at times prior, the employer did not assess the exposure of employees that may reasonably be expected to be exposed to respirable crystalline silica when cutting and polishing stone slabs. Employees operate a Saca Robo SawJet to cut slabs and polish them using Metabo polishing wheels.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1053 F02 I
- Issued
- Feb 28, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1053(f)(2)(i): The employer did not establish and implement a written exposure control plan: a)1602 S Abilene St, Unit G: On or about January 6, 2025, and at times prior, the employer did not implement an exposure control plan where employees conduct tasks with exposure to respirable crystalline silica, including but not limited to cutting and polishing stone slabs, and cleaning stone dust.
Recent events (4)
- · I $0
- · Z $900
- · I (O) $0
More inspections at Stone City, LLC
View Stone City, LLC's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 347961419.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.