Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UNIFIED DOOR AND HARDWARE GROUP, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of UNIFIED DOOR AND HARDWARE GROUP, LLC in 1105 SAND POND ROAD, LAKE MARY, FL 32746 (NAICS 423710). OSHA activity number 347964967.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Unified Door and Hardware Group, LLC — free Get an email when a new federal OSHA severe-injury report for Unified Door and Hardware Group, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1105 SAND POND ROAD
City
LAKE MARY
State
FL
ZIP
32746
Mailing
1650 SUCKLE HIGHWAY, PENNSAUKEN, NJ 08110
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423710
Employees
31
Ownership type
A

4 citations on file for this inspection.

1910.134 C01

Other-than-serious Gravity 5 1 instance 5 exposed
Issued
Mar 24, 2025
Abate by
May 8, 2025
Penalty
Initial $8,276 · Current $4,966 Reduced

Hazardous substances 0040

29 CFR 1910.134(c)(1):The employer did not establish and implement a written respiratory protection program with worksite-specific procedures in any workplace where respirators were necessary to protect the health of the employee or whenever respirators were required by the employer:  a. On January 7, 2025, in the production area: the employer exposed employees to respiratory hazards, in that employees wore the N95 respirators while performing grinding and welding activities. The employer did not establish and implement a written respiratory protection program with worksite-specific procedures in any workplace where respirators were necessary to protect the health of the employee or whenever respirators were required by the employer.
Recent events (2)
  • — I (O) $4965.6
  • — Z (S) $8276

1910.134 E01

Other-than-serious Gravity 1 1 instance 5 exposed
Issued
Mar 24, 2025
Abate by
May 8, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a. On January 7, 2025, in the production area: the employer exposed employees to respiratory hazards, when using employer required respirators without having been provided a medical evaluation prior to use. The employer requires employees to wear N-95 respirators without having been provided medical evaluations prior to respirator use.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 F01

Other-than-serious Gravity 1 1 instance 5 exposed
Issued
Mar 24, 2025
Abate by
May 8, 2025
Penalty
Initial $0 · Current $0

Hazardous substances 00402587

29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):  a. On January 7, 2025, in the production area: the employer exposed employees to respiratory hazards, when using employer required respirators without having been provided a medical evaluation prior to use. The employer requires employees to wear N-95 respirators without providing fit test prior to respirator use.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.178 L04 III

Other-than-serious 1 instance 1 exposed
Issued
Mar 24, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):   a. On or about January 7, 2025, at the site: employees were exposed to struck-by hazards, in that the employer did not certify that each operator has been trained and evaluated to operate the  forklift.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Unified Door and Hardware Group, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347964967.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.