BROOKLYN, NY —
OSHA Inspection: R&L GROUP LLC
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of R&L GROUP LLC in 140 58TH STREET, BUILDING A, UNIT 8, BROOKLYN, NY 11220 (NAICS 315990). OSHA activity number 347970527.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- R&L GROUP LLC
- Site address
- 140 58TH STREET, BUILDING A, UNIT 8
- City
- BROOKLYN
- State
- NY
- ZIP
- 11220
- Mailing
- 21224 BEACH BLVD, HUNTINGTON BEACH, CA 92648
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 315990
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 25, 2025
- Abate by
- Jul 14, 2025
- Penalty
- Initial $4,965 · Current $3,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Site: 140 58th Street, Building A, Unit 8, Brooklyn NY 11220 On or about 1/6/25 a) Employees were exposed to caught in between/amputation hazards. The Surgical Gown Sleeve Machine was not equipped with machine guarding to protect the operator.
Recent events (3)
- — F (S) $3400
- — C (S) $4965
- — Z (S) $4965
1910.147 C01
- Issued
- Jun 25, 2025
- Abate by
- Jul 14, 2025
- Penalty
- Initial $4,965 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. Site: 140 58th Street, Building A, Unit 8, Brooklyn NY 11220 On or about 1/6/25 a) The employer failed to establish a written Lockout/Tagout (LOTO) program to control hazardous energy. The employees were exposed to uncontrolled energy sources while operating a surgical gown sleeve machine.
Recent events (3)
- — F (S) $3500
- — C (S) $4965
- — Z (S) $4965
1910.147 C04 I
- Issued
- Jun 25, 2025
- Abate by
- Jul 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. Site: 140 58th Street, Building A, Unit 8, Brooklyn NY 11220 On or about 1/6/25 a) The employer did not implement Lock/Out Tag/Out procedures to isolate the Surgical Gown Sleeve Machine Machine from its power source.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C05 I
- Issued
- Jun 25, 2025
- Abate by
- Jul 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(i):Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing, or blocking of machines or equipment from energy sources. Site: 140 58th Street, Building A, Unit 8, Brooklyn NY 11220 Or on about 1/6/25 a) The employer did not provide employees with locks, tags, or other hardware for isolating all energy sources when performing cleaning operations on the Surgical Gown Sleeve Machine.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Jun 25, 2025
- Abate by
- Jul 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices. Site: 140 58th Street, Building A, Unit 8, Brooklyn NY 11220 On or about 1/6/25 a) No training was provided by the employer to ensure that the purpose and function of the energy control program was understood by the employees. Employees were exposed uncontrolled energy sources while cleaning the rollers of a Surgical Gown Sleeve Machine.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 315990)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347970527.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.