SPRINGFIELD, MO —
OSHA Inspection: MCCOYS TRUCK DETAILING
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MCCOYS TRUCK DETAILING in 2818 NORTH OAK GROVE AVENUE, SPRINGFIELD, MO 65803 (NAICS 811192). OSHA activity number 347984452.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Mccoys Truck Detailing — free
Get an email when a new federal OSHA severe-injury report for Mccoys Truck Detailing is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- MCCOYS TRUCK DETAILING
- Site address
- 2818 NORTH OAK GROVE AVENUE
- City
- SPRINGFIELD
- State
- MO
- ZIP
- 65803
- Mailing
- 4074 RIDGE CREST DRIVE, BARNHART, MO 63012
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811192
- Employees
- 6
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.106 D05 I
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $5,675 · Current $5,675
General-duty citation text
29 CFR 1910.106(d)(5)(i): Flammable liquids, including stock for sale, were not be stored so as to limit use of exits, stairways, or areas normally used for the safe egress of people. At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: The employer did not maintain exit routes free from obstructions in the wash bay. An exit in the wash bay was blocked by a pallet containing buckets of flammable liquids.
Recent events (2)
- — C (S) $5675
- — Z (S) $5675
1910.106 D05 III
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(d)(5)(iii): Flammable liquid storage in office occupancies was not prohibited except that which is required for maintenance and operation of building and operation of equipment. At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: The employer did not maintain exit routes free from obstructions in the wash bay. An exit in the wash bay was blocked by a pallet containing buckets of flammable liquids that were not stored in steel containers.
Recent events (2)
- — C (S) $0
- — Z (S) $0
1910.157 C04
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $5,675 · Current $5,675
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition: At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employees were exposed to hazards associated with portable fire extinguishers that were not fully charged and in an operable condition.
Recent events (2)
- — C (S) $5675
- — Z (S) $5675
1910.157 E03
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employees engaged in work activities were exposed to hazards associated with portable fire extinguishers that were not inspected on an annual basis.
Recent events (2)
- — C (S) $0
- — Z (S) $0
1910.303 B01 IV
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1910.303(b)(1)(iv): Electric equipment was not free from recognized hazards that were likely to cause serious physical harm to employees, such as damaged electrical insulation: At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employees were exposed to electrical shock hazards. a) The VIS Automated Aluminum Wheel polishing machine was connected to the Grizzly dust collector. The dust collector or was plugged into an extension cord that had exposed wires. b) The angle grinder used to polish aluminum was plugged into an extension cord that had exposed wires.
Recent events (2)
- — C (S) $6620
- — Z (S) $6620
1910.303 B02
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employes were exposed to electrical shock hazards when using extension cords daisy chained together to power tools throughout the shop.
Recent events (2)
- — C (S) $6620
- — Z (S) $6620
1910.303 G01 I
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $4,729 · Current $4,729
General-duty citation text
29 CFR 1910.303(g)(1)(i): Workspace was less than 30 inches wide in front of electric equipment operating at 600 volts, nominal, or less: At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employees were exposed to electrical shock hazards when accessing the electrical panel on the west side of the shop. The employer did not maintain adequate working space in front of the panel.
Recent events (2)
- — C (S) $4729
- — Z (S) $4729
1910.305 G01 IV A
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employees were exposed to electrical shock hazards when using temporary wiring in lieu of permanent wiring to power tools. a) The Grizzly dust collector was plugged into an extension cord that was run across the shop floor to an electrical outlet. b) The angle grinder was plugged into an extension cord that was run across the shop floor to an electrical outlet. c) A vertical shop light was plugged into an extension cord that was plugged into an electrical outlet.
Recent events (2)
- — C (S) $6620
- — Z (S) $6620
1910.305 G01 IV D
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(D): Flexible cords were attached to building surfaces: At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employees were exposed to electrical shock hazards when utilizing tools plugged into extension cords that were attached to building surfaces that were then plugged into electrical wall outlets. a) A vertical shop light was plugged into an extension cord that was hung from a bungee cord from the wall. b) An angle grinder was plugged into an extension cord that was wrapped around an electrical conduit.
Recent events (2)
- — C (S) $0
- — Z (S) $0
1910.334 A02 I
- Issued
- Jun 18, 2025
- Abate by
- Jul 16, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): At the commercial worksite located at 2818 North Oak Grove Avenue, Springfield, Missouri: Employees were exposed to electrical shock hazards when using extension cords with exposed wiring that had not been inspected or removed from service. a) The VIS Automated Aluminum Wheel polishing machine was connected to the Grizzly dust collector. The dust collector or was plugged into an extension cord that had exposed wires. b) The angle grinder used to polish aluminum was plugged into an extension cord that had exposed wires.
Recent events (2)
- — C (S) $6620
- — Z (S) $6620
More inspections at Mccoys Truck Detailing
View Mccoys Truck Detailing's full OSHA safety record →
More inspections in this industry (NAICS 811192)
Jul 16, 2026
Grand Slam CAR Wash · VIRGINIA BEACH, VA
Jul 15, 2026
RCP CW Leasing, LLC · DEFUNIAK SPRINGS, FL
Jul 14, 2026
Flagship Carwash · WOODBRIDGE, VA
Jul 14, 2026
Bowie Enterprises · CLOVIS, CA
Jul 14, 2026
Quang X. Tran · MODESTO, CA
More inspections in MO
Jul 17, 2026
United Parcel Service · SAINT LOUIS, MO
Jul 15, 2026
Triple J Construction, LLC. · PLATTE CITY, MO
Jul 14, 2026
Torchylo Builders, LLC. · CLINTON, MO
Jul 13, 2026
Jorge Merida · BLUE SPRINGS, MO
Jul 9, 2026
Niagara Bottling · KANSAS CITY, MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347984452.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.