PARKSTON, SD —
OSHA Inspection: CARLOS RODRIGUEZ
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of CARLOS RODRIGUEZ in 204 WEST DEPOT STREET, PARKSTON, SD 57366 (NAICS 238130). OSHA activity number 348027343.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARLOS RODRIGUEZ
- Site address
- 204 WEST DEPOT STREET
- City
- PARKSTON
- State
- SD
- ZIP
- 57366
- Mailing
- 305 MADISON STREET P.O. BOX 207, THOMPSON, IA 50478
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 7
- Ownership type
- A
Citations
10 citations on file for this inspection.
1926.100 A
- Issued
- Apr 11, 2025
- Abate by
- May 13, 2025
- Penalty
- Initial $1,809 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure employees utilized protective head covers while exposed to such hazards as, but not limited to, unstable roof truss system structures, rigging equipment, and tools. This condition exposed employees to struck-by hazards while working directly adjacent to and below roof truss erection activities.
Recent events (2)
- — I (S) $1000
- — Z (S) $1809
1926.251 A06
- Issued
- Apr 11, 2025
- Abate by
- May 13, 2025
- Penalty
- Initial $3,015 · Current $1,600 Reduced
General-duty citation text
29 CFR 1926.251(a)(6): The employer did not ensure each day before being used, and during use, where service conditions warrant, the sling and all fastenings and attachments were inspected for damage or defects by a competent person, and damaged or defective slings were not immediately removed from service: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure a competent person conducted a visual inspection prior to each shift covering the Erickson Manufacturing synthetic lifting straps, Serial Number 59700. This condition exposed employees to struck-by hazards.
Recent events (2)
- — I (S) $1600
- — Z (S) $3015
1926.451 G01
- Issued
- Apr 11, 2025
- Penalty
- Initial $4,965 · Current $2,400 Reduced
General-duty citation text
29 CFR 1926.451(g)(1):Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure that employees were protected from falls while conducting roof truss framing activities while standing and climbing on the mid rail of a scaffold platform on a center framed wall of a commercial building. The employees were climbing on a scaffold platform railing which was raised more than 25 feet high by a Skyjack Scissor Lift, Model Number: SJ 9250 Serial number: 50002044 scissor lift system to gain access to the top of a roof truss chord and employees were not using a personal fall protective system. This condition exposed the employees to fall hazards greater than ten feet.
Recent events (2)
- — I (S) $2400
- — Z (S) $4965
1926.453 B02 V
- Issued
- Apr 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.453(b)(2)(v): A safety harness was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure that an employee was protected from falls by a personal fall arrest system while conducting commercial framing activities while working from a Genie Aerial Lift, Model Number: Z-135, Serial Number: N70636. This condition exposed the employee to fall and ejection hazards while working from the aerial lift.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.454 A
- Issued
- Apr 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure that scaffolding training was conducted for the employees who were using the Genie Aerial Lift, Model Number: Z-135, Serial Number: N70636. and exposed to fall hazards while conducting framing activities on a commercial building. This condition exposed employees to fall hazards greater than ten feet. (b)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure that scaffolding training was conducted for the employees who were using the Skyjack Scissor Lift, Model Number: SJ 9250, Serial Number: 50002044. and exposed to fall hazards while conducting framing activities on a commercial building. This condition exposed employees to fall hazards greater than ten feet. (c)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure that scaffolding training was conducted for the employees who were using the Skyjack Scissor Lift, Model Number: SJ 7127, Serial Number: 34001964. and exposed to fall hazards while conducting framing activities on a commercial building. This condition exposed employees to fall hazards greater than ten feet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B01
- Issued
- Apr 11, 2025
- Penalty
- Initial $4,220 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the exposing employer did not ensure that an employee was protected from falls while conducting framing activities on a commercial building. This condition exposed the employees to fall hazards greater than six feet.
Recent events (2)
- — I (S) $2500
- — Z (S) $4220
1926.503 B01
- Issued
- Apr 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure a written training certification on the use of fall protection systems prior to employees being exposed to fall hazards while working on a commercial property. This condition exposed employees to fall hazards greater than six feet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1427 A
- Issued
- Apr 11, 2025
- Abate by
- Sep 5, 2025
- Penalty
- Initial $3,618 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.1427(a): General requirements for operators. The employer did not ensure that each operator is trained, certified/ licensed, and evaluated in accordance with this section before operating any equipment covered under subpart CC, except for the equipment listed in paragraph (a)(2) of this section: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure that the operator of the National Hydraulic Mobile Crane, Model Number: 1300A, Serial Number: 290319, was trained, certified/licensed, and evaluated prior to operating the mobile crane. This condition exposed employees to struck-by hazards.
Recent events (2)
- — I (S) $2000
- — Z (S) $3618
1926.1412 D01
- Issued
- Apr 11, 2025
- Abate by
- May 13, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1412(d)(1): The employer did not ensure that a competent person conducted a visual inspection prior to each shift on the equipment that will be used: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure a competent person conducted a visual inspection prior to each shift covering the National Hydraulic Mobile Crane, Model Number: 1300A, Serial Number: 290319. This condition exposed employees to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1425 C03
- Issued
- Apr 11, 2025
- Abate by
- May 13, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1425(c)(3): The employer did not ensure that the materials being hoisted when employees were hooking, unhooking, or guiding the materials were rigged by a qualified rigger: (a)Carlos Rodriguez dba Gary's Construction at 204 West Depot Street, Parkston, SD 57366: On or about and at times prior to February 6, 2025, the employer did not ensure that employees using the Erickson Manufacturing synthetic lifting straps, Serial Number: 59700, to hook, unhook, and guide roof trusses were rigged by a qualified rigger. This condition exposed employees to struck-by and crushing hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Carlos Rodriguez
View Carlos Rodriguez's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in SD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348027343.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.