ALICEVILLE, AL —
OSHA Inspection: LEWIS BROTHERS LUMBER COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LEWIS BROTHERS LUMBER COMPANY, INC. in 1031 13TH STREET NW, ALICEVILLE, AL 35442 (NAICS 321912). OSHA activity number 348038092.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LEWIS BROTHERS LUMBER COMPANY, INC.
- Site address
- 1031 13TH STREET NW
- City
- ALICEVILLE
- State
- AL
- ZIP
- 35442
- Mailing
- 1031 13TH STREET NW P.O. BOX 334, ALICEVILLE, AL 35442
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321912
- Employees
- 91
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.213 D01
- Issued
- Jul 25, 2025
- Abate by
- Sep 19, 2025
- Penalty
- Initial $12,744 · Current $8,921 Reduced
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) On or about 2/6/2025 and at times prior to, in the flooring department at saw #5, operator used crosscut saws with guard that created a gap that allowed operators to access the danger zone while cutting wooden boards. (b) On or about 2/6/2025 and at times prior to, in the flooring department at saw #6, operator used crosscut saws with guard that created a gap that allowed operators to access the danger zone while cutting wooden boards. (c) On or about 2/6/2025 and at times prior to, in the flooring department at saw #7, operator used crosscut saws with guard that created a gap that allowed operators to access the danger zone while cutting wooden boards. (d) On or about 2/6/2025 and at times prior to, in the flooring department at saw #8, operator used crosscut saws with guard that created a gap that allowed operators to access the danger zone while cutting wooden boards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $8920.8
- — Z (S) $12744
1910.147 C07 IV
- Issued
- Jul 25, 2025
- Abate by
- Sep 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished: a) On or about 07/21/2016, in the flooring department, affected employees had not been certified as required. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Lewis Brothers Lumber Company, INC.
View Lewis Brothers Lumber Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321912)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348038092.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.