OLYPHANT, PA —
OSHA Inspection: DESAVINO & SONS, INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DESAVINO & SONS, INCORPORATED in 1003 UNDERWOOD ROAD MID VALLEY INDUSTRIAL PARK, OLYPHANT, PA 18447 (NAICS 337110). OSHA activity number 348041591.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DESAVINO & SONS, INCORPORATED
- Site address
- 1003 UNDERWOOD ROAD MID VALLEY INDUSTRIAL PARK
- City
- OLYPHANT
- State
- PA
- ZIP
- 18447
- Mailing
- 1003 UNDERWOOD ROAD MID VALLEY INDUSTRIAL PARK, OLYPHANT, PA 18447
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.37 A03
- Issued
- Mar 19, 2025
- Penalty
- Initial $2,837 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a) Production Area - On or about February 13, 2025, employees were exposed to fire hazards because an emergency exit was partially obstructed by vertically stacked wooden boards. b) Production Area - On or about February 13, 2025, employees were exposed to fire hazards because an emergency exit was partially obstructed by a wooden cabinet. Corrected During Inspection.
Recent events (2)
- — I (S) $2000
- — Z (S) $2837
1910.213 D01
- Issued
- Mar 19, 2025
- Penalty
- Initial $4,729 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Production Area - On or about February 13, 2025, employees using a cabinet table saw were exposed to an amputation hazard because the automatically adjusting hood over the sawblade had been removed. Corrected During Inspection
Recent events (2)
- — I (S) $4000
- — Z (S) $4729
1910.242 B
- Issued
- Mar 19, 2025
- Penalty
- Initial $2,837 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. and effective chip guarding and personal protective equipment was not used: a) CNC Machine - On or about February 13, 2025, employees using compressed air for cleaning purposes were exposed to laceration hazards because the compressed air was not reduced to less than thirty pounds per square inch. b) Sanding Area (hallway) - On or about February 13, 2025, employees using compressed air for cleaning purposes were exposed to laceration hazards because the compressed air was not reduced to less than thirty pounds per square inch. c) Production Areas - On or about February 13, 2025, employees using compressed air for cleaning purposes were exposed to struck-by hazards because the air nozzles were not equipped with effective chip guarding. Corrected During Inspection.
Recent events (2)
- — I (S) $2000
- — Z (S) $2837
1910.132 D02
- Issued
- Mar 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a) Facility Wide - On or about February 13, 2025, the employer did not verify via a written certification that they had assessed the facility for personal protection equipment use. Corrected During Inspection.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 II
- Issued
- Mar 19, 2025
- Abate by
- Apr 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Production Areas - On or about February 13, 2025, the employer failed to verify via a written certification, that the energy control procedures had been inspected at least annually. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C07 IV
- Issued
- Mar 19, 2025
- Abate by
- Apr 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a) Production Areas- On or about February 13, 2025, the employer failed to verify via a written certification, that employees had been trained on the energy control program and procedures. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Desavino & Sons, Incorporated
View Desavino & Sons, Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348041591.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.