Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MUELLER PALLETS, L.L.C.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MUELLER PALLETS, L.L.C. in 27059 MUELLER PLACE, SIOUX FALLS, SD 57108 (NAICS 321920). OSHA activity number 348063967.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mueller Pallets, L.L.C. — free Get an email when a new federal OSHA severe-injury report for Mueller Pallets, L.L.C. is published. One employer, no account, unsubscribe in one click.
Site address
27059 MUELLER PLACE
City
SIOUX FALLS
State
SD
ZIP
57108
Mailing
27059 MUELLER PLACE, SIOUX FALLS, SD 57108
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321920
Employees
25
Ownership type
A

14 citations on file for this inspection.

1910.212 A03 II

Other-than-serious Gravity 10 1 instance 1 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $9,268 · Current $3,707 Reduced
29 CFR  1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle:   (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure the unused portion of the blade involving the Powermatic, vertical band saw, Model No. 81, Serial number 87-3432, located in the East building "Cutting Room" was effectively guarded. This condition exposed employees to amputation hazards.
Recent events (2)
  • — I (O) $3707.2
  • — Z (S) $9268

1910.213 I03

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.213(i)(3): Feed rolls of band resaw(s) were not protected with a suitable guard to prevent the hands of the operator from coming in contact with the in running rolls at any point:   (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure the feed roller on the Industrial Morgan Saw (Re-Saw), located in the West Building "Cutting Room" was adequately guarded. This condition exposed employees to caught-in hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.213 R03

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.213(r)(3): For combination or universal woodworking machines each point of operation of any tool shall be guarded as required for such a tool in a separate machine:  (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure employees were protected from injury in that, the saw blade on the Northtech NTCS 18L-10 Upcut Saw / Model CS-13L-10/Serial No 00123, located in the West building cutting room along the South wall, was not effectively guarded while employees were feeding wood stock into the machine. This condition exposed employees to caught-in and amputation hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 F03

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $5,628 · Current $2,251 Reduced
29 CFR  1910.219(f)(3): Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machines or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets:   (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure employees were protected from injury in that, the exposed sprocket and chain on Section 1 of the Pallet Stacker (Serial Number: A432220) was not effectively guarded. Employees feeding wood crates into the machine were exposed to an in-running nip point hazard regarding the pneumatically driven chains and sprockets used to stabilize and move the material through the notcher's point of operation. This condition exposed employees to amputation hazards.   (b)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure employees were protected from injury in that, the exposed chain and sprocket on Section 2 of the Pallet Stacker (Serial Number: A432218) was not effectively guarded. Employees feeding wood crates into the machine were exposed to an in-running nip point hazard regarding the pneumatically driven chains and sprockets used to stabilize and move the material through the notcher's point of operation. This condition exposed employees to amputation hazards.  (c)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure employees were protected from injury in that, the exposed chain and sprocket on Section 3 of the Pallet Stacker (Serial Number: A432221) was not effectively guarded. Employees feeding wood crates into the machine were exposed to an in-running  nip point hazard regarding the pneumatically driven chains and sprockets used to stabilize and move the material through the notcher's point of operation. This condition exposed employees to amputation hazards.  (d)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure employees were protected from injury in that, the exposed chain and sprocket on Section 4 of the Pallet Stacker (Serial Number: A432217) was not effectively guarded. Employees feeding wood crates into the machine were exposed to an in-running nip point hazard regarding the pneumatically driven chains and sprockets used to stabilize and move the material through the notcher's point of operation. This condition exposed employees to amputation hazards.
Recent events (2)
  • — I (O) $2251.2
  • — Z (S) $5628

1910.242 B

Deleted Serious Gravity 1 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $3,376 · Current $0 Reduced
29 CFR  1910.242(b): Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment:   (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure that compressed air used for cleaning was reduced to less than 30 p.s.i.  on the air nozzle in the east building cutting area. The air nozzle had pressure in excess of 80 p.s.i. This condition exposed employees to laceration and pulmonary embolism.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3376

1910.305 B01 I

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $5,628 · Current $2,251 Reduced
29 CFR  1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings shall be protected from abrasion, and openings through which conductors enter shall be effectively closed:  (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure the electric panel located near the Stacker  in the East Building Cutting Room, was completely closed and free from openings. This condition exposed employees to shock and burn hazards.  (b)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure the electric outlet located near the Stacker in the East Building Cutting Room, was covered and free from openings.  This condition exposed employees to shock and burn hazards.  (c)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer failed to secure electric cords within the electric outlet /panel for the Vertical Saw in the East Building Cutting Room, in that extension cords are used with the equipment plugged directly into an open wall socket, approximately 100 inches away from the wall. This condition exposed employees to shock and burn hazards.
Recent events (2)
  • — I (O) $2251
  • — Z (S) $5628

1910.305 B02 I

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear:  (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer failed to ensure face plate covers were installed as required in the electrical outlet/ box in the East Building Cutting Room, located next to the electrical panel near the stacker. This condition exposed employees to shock and burn hazards.  (b)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer failed to ensure face plate covers were installed as required in the electrical outlet /box for the Vertical Saw in the East Building Cutting Room. This condition exposed employees to shock and burn hazards.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.1200 E01

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $4,502 · Current $0 Reduced
29 CFR  1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:  (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure that  a written hazard communication program at least described how the criteria specified for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also included a hazardous chemicals list and methods used to inform employees of the hazards of non-routine tasks, had not been developed for employee exposures, such as but not limited to the following chemicals:      1)Engine Oil 2)Spray Paint 3)Lubricant 4)Black Ink    Abatement Note:  The written hazard communication program will also include:   (1) A list of the hazardous chemicals known to be present using an identity that is referenced on the appropriate safety data sheet (the list may be compiled for the workplace as a whole or for individual work areas); and,  (2) The methods the employer will use to inform employees of the hazards of non-routine tasks.  (3) The location and availability of the written hazard communication program, including the required list(s) of hazardous chemicals, and safety data sheets required by this section.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4502

1910.1200 H03

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(3): The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv):    (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer, the employer did not ensure that employees were trained on chemical specific hazards present in the workplace. This condition exposed employees to chemical hazards.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1904.41 A01 I

Deleted Other-than-serious 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $1,125 · Current $0 Reduced
29 CFR  1904.41(a)(1)(i): The establishment had 20 or more employees but fewer than 250 employees at some time during the previous calendar year, and the establishment was classified in an industry listed in appendix A to subpart E of this part, and the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee by the specified date:  (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer failed to electronically submit data from the Summary of Work-Related Injuries and Illnesses.
Recent events (2)
  • — I (O) $0
  • — Z (O) $1125

1910.95 C01

Deleted Other-than-serious 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:  (a) Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not implement a continuing, effective Hearing Conservation Program as described in 29 CFR 1910.95(c) through (o).  This condition exposed employees to hearing loss.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 C02 I

Other-than-serious 1 instance 2 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:  (a) Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer, the employer did not ensure employees who are voluntarily wearing dust masks are provided with training on Appendix D. This condition exposed employees to respiratory hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.147 C04 II

Other-than-serious 1 instance 1 exposed
Issued
Aug 6, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D):   (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not ensure that machine specific energy control procedures were developed and utilized for the safe application, usage and removal of energy control devices with more than one source of energy, to include, but not limited to, the following machines or equipment:  1)Stacker - Located in the East building "Cutting Room" - Section 1 of the Pallet Stacker (Serial Number: A432220) - Section 2 of the Pallet Stacker (Serial Number: A432218) - Section 3 of the Pallet Stacker (Serial Number: A432221) - Section 4 of the Pallet Stacker (Serial Number: A432217) 2) Vertical Stationary Band Saw, Powermatic, Model No. 81, Serial number 87-3432, located in the East building "Cutting Room" 3) North Tech Up-Saw:  Northtech NTCS 18L-10,  Model: CS-13L-10, Serial No: 00123, located in the West building cutting Room 4) Industrial Morgan Saw located in the West Building "Cutting Room"
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 L06

Deleted Other-than-serious 1 instance 4 exposed
Issued
Aug 6, 2025
Abate by
Sep 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(6): Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:   (a)Mueller Pallets, L.L.C. at 27059 Mueller Place, Sioux Falls, SD 57108: On or about and at times prior to February 25, 2025, the employer did not provide documentation to verify that employees had been trained / certified to operate forklifts prior to operation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Mueller Pallets, L.L.C.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348063967.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.