GRAND FORKS, ND —
OSHA Inspection: GRAND FORKS WELDING & MACHINE COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GRAND FORKS WELDING & MACHINE COMPANY in 1812 GATEWAY DRIVE, GRAND FORKS, ND 58203 (NAICS 811310). OSHA activity number 348124942.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GRAND FORKS WELDING & MACHINE COMPANY
- Site address
- 1812 GATEWAY DRIVE
- City
- GRAND FORKS
- State
- ND
- ZIP
- 58203
- Mailing
- 1812 GATEWAY DRIVE, GRAND FORKS, ND 58203
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 19
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 II
- Issued
- Jun 4, 2025
- Abate by
- Jul 9, 2025
- Penalty
- Initial $5,675 · Current $3,405 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck: a) On March 19, 2025, at 1812 Gateway Dr, Grand Forks, North Dakota, for employees operating forklifts to lift and haul material throughout the facility, the employer did not ensure they were trained, certified, and evaluated on performance.
Recent events (2)
- — I (S) $3405
- — Z (S) $5675
1904.29 B03
- Issued
- Jun 4, 2025
- Penalty
- Initial $946 · Current $568 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): Each recordable injury or illness was not entered on the OSHA 300 Log and on an incident report (OSHA Form 301or equivalent) within seven (7) calendar days of receiving information that a recordable injury or illness had occurred: a) On March 19, 2025, at 1812 Gateway Dr, Grand Forks, North Dakota the employer did not record a workplace injury on the OSHA 300 Log for calendar year 2025 that occurred on February 4, 2025.
Recent events (2)
- — I (O) $567.6
- — Z (O) $946
1904.32 A
- Issued
- Jun 4, 2025
- Abate by
- Jul 9, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.32(a): The employer did not ensure that at the end of the year an annual summary of injuries and illnesses on the OSHA 300 Log was created, certified and posted. a) On March 19, 2025, at 1812 Gateway Dr, Grand Forks, North Dakota, the employer did not ensure the OSHA 300 log was certified and posted for the calendar year 2024.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 I01
- Issued
- Jun 4, 2025
- Abate by
- Jul 9, 2025
- Penalty
- Initial $531 · Current $319 Reduced
General-duty citation text
29 CFR 1910.178(i)(1): Concentration levels of carbon monoxide gas created by powered industrial truck operations exceeded the levels specified in 1910.1000: a) On March 19, 2025, at 1812 Gateway Dr, Grand Forks, North Dakota, employees working in the warehouse, loading and unloading materials, and fabricating parts were potentially overexposed to high levels of carbon monoxide where the CAT Model GP25, Serial 5AM91063 forklift had carbon monoxide emissions of approximately 200 ppm..
Recent events (2)
- — I (O) $318.6
- — Z (O) $531
1910.178 L04 III
- Issued
- Jun 4, 2025
- Abate by
- Jul 9, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) On March 19, 2025, at 1812 Gateway Dr, Grand Forks, North Dakota, certified forklift operators' using forklifts to move materials and equipment throughout the facility were not evaluated for their performance and competency every 3 years.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Grand Forks Welding & Machine Company
View Grand Forks Welding & Machine Company's full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348124942.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.