HAMILTON, NJ —
OSHA Inspection: WOODLAND MANUFACTURING CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WOODLAND MANUFACTURING CO. in 1936 E. STATE STREET, HAMILTON, NJ 08619 (NAICS 322211). OSHA activity number 348148487.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WOODLAND MANUFACTURING CO.
- Site address
- 1936 E. STATE STREET
- City
- HAMILTON
- State
- NJ
- ZIP
- 08619
- Mailing
- 1936 E. STATE STREET, HAMILTON, NJ 08619
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322211
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.133 A01
- Issued
- Jun 10, 2025
- Abate by
- Jul 8, 2025
- Penalty
- Initial $2,837 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.133(a)(1):The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: (a)(Production Floor: The employer did not ensure the use of personal protective equipment such as safety glasses when employees were exposed to flying particles when using compressed air to clean equipment on or about 4/1/25. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $1700
- — Z (S) $2837
1910.147 C04 I
- Issued
- Jun 10, 2025
- Abate by
- Jul 8, 2025
- Penalty
- Initial $6,620 · Current $4,150 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a)Production Floor: Lockout tagout procedures were not utilized for the control of potentially hazardous energy from equipment that is serviced, cleaned or maintained by employees such as, but not limited to, the Gopfert SRE Maxi box maker (Flexo Folder) on or about 4/1/25. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.
Recent events (2)
- — I (S) $4150
- — Z (S) $6620
1910.147 C06 I
- Issued
- Jun 10, 2025
- Abate by
- Jul 8, 2025
- Penalty
- Initial $6,620 · Current $4,150 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a)Production Floor: Annual audits of the lock out tag out procedures used by the employees when setting up and performing blade changes on machines such as but not limited to the Gopfert SRE Maxi box maker were not conducted on or about 4/1/25. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $4150
- — Z (S) $6620
1910.178 L04 III
- Issued
- Jun 10, 2025
- Abate by
- Jul 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) production floor: Employees were exposed to struck-by hazards in that employees were allowed to operate a powered industrial truck without the employer ensuring that the operators had received the required evaluation at least once every three years as specified in the regulation on or about 4/1/25. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Woodland Manufacturing CO.
View Woodland Manufacturing CO.'s full OSHA safety record →
More inspections in this industry (NAICS 322211)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348148487.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.