LAUREL, MT —
OSHA Inspection: SQUARE ONE CABINETS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SQUARE ONE CABINETS in 210 SOUTH WASHINGTON, LAUREL, MT 59044 (NAICS 337110). OSHA activity number 348162009.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SQUARE ONE CABINETS
- Site address
- 210 SOUTH WASHINGTON
- City
- LAUREL
- State
- MT
- ZIP
- 59044
- Mailing
- 210 SOUTH WASHINGTON, LAUREL, MT 59044
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 A01
- Issued
- Sep 9, 2025
- Abate by
- Oct 3, 2025
- Penalty
- Initial $1,447 · Current $724 Reduced
General-duty citation text
29 CFR 1910.22(a)(1)): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. a) DeWalt Chop Saw 210 South Washington Laurel, MT 59044: On or about April 7, 2025 and at times prior, employees were exposed to fire hazards from an accumulated amount of saw dust located near the center of the shop. b) Sliding Table Saw 210 South Washington Laurel, MT 59044: On or about April 7, 2025 and at times prior, employees were exposed to fire hazards from an accumulated amount of saw dust located near the eastern side of the shop. c) CNC 210 South Washington Laurel, MT 59044: On or about April 7, 2025 and at times prior, employees were exposed to fire hazards from an accumulated amount of saw dust located near the southeastern side of the shop. d) Outlet 210 South Washington Laurel, MT 59044: On or about April 7, 2025 and at times prior, employees were exposed to fire hazards from an accumulated amount of saw dust located near the western wall of the shop. e) DeWalt Chop Saw 210 South Washington Laurel, MT 59044: On or about April 7, 2025 and at times prior, employees were exposed to fire hazards from an accumulated amount of saw dust located near the western wall of the shop. f) Damper Switch 210 South Washington Laurel, MT 59044: On or about April 7, 2025 and at times prior, employees were exposed to fire hazards from an accumulated amount of saw dust located near the western wall of the shop.
Recent events (2)
- — I (S) $723.5
- — Z (S) $1447
1910.132 D01
- Issued
- Sep 9, 2025
- Abate by
- Oct 3, 2025
- Penalty
- Initial $1,447 · Current $724 Reduced
General-duty citation text
29 CFR 1910.132(d)(1):The employer did not assess the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment: a) Shop: On or about April 7, 2025, and at times prior, employees were exposed to struck by hazards while walking and working throughout the facility without personal protective equipment (PPE). The employer failed to conduct a hazard assessment to determine employee exposure to injuries to the feet that would require the use of mandated PPE.
Recent events (2)
- — I (S) $723.5
- — Z (S) $1447
1910.212 A01
- Issued
- Sep 9, 2025
- Abate by
- Oct 3, 2025
- Penalty
- Initial $1,447 · Current $724 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) CNC: On or about On or about April 7, 2025 and at times prior, employees were exposed to struck-by hazards while cutting wood products. Employees were permitted to stand in the operational envelope while the machine was operating exposing them to being struck by the equipment.
Recent events (2)
- — I (S) $724
- — Z (S) $1447
1910.147 C06 I
- Issued
- Sep 9, 2025
- Abate by
- Oct 3, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Square One Cabinets: On or about April 7, 2025 and at times prior, the employer failed to conduct an annual audit of the Companies Lockout Tagout Program.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.213 D01
- Issued
- Sep 9, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1):Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Saw Stop Table Saw: On or about April 7, 2025 and at times prior, employees were exposed to laceration hazards while cutting wood products without having a hood guard in place.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Square ONE Cabinets
View Square ONE Cabinets's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348162009.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.