OSHA Inspection: STANLEY WOOD PRODUCTS, INC.

Issued

May 9, 2025

Penalty

Initial $2,412 · Current $0 Reduced

General-duty citation text

29 CFR  1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:  Employees engaged in cabinet making at 15248 Broadmoor Street, Overland Park, Kansas were exposed to fire hazards due to an exit route door in the compressor room being boarded closed during business hours.

Issued

May 9, 2025

Abate by

Jun 27, 2025

Penalty

Initial $2,412 · Current $2,412

General-duty citation text

29 CFR  1910.178(l)(1)(i):  The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  Employees were exposed to struck-by hazards.  Employees engaged in material handing activities using the TCM FG-25 forklift were exposed to struck-by hazards in that comprehensive forklift training was not provided prior to permitting forklift operation.

Issued

May 9, 2025

Abate by

Jun 27, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):  Employee(s) operating and working around the TCM FG-25 forklift located at 15248 Broadmoor Street, Overland Park, Kansas were exposed to struck-by hazards due to the forklift not having a seat belt or functioning horn.

Issued

May 9, 2025

Abate by

Jun 27, 2025

Penalty

Initial $3,215 · Current $3,215

General-duty citation text

29 CFR  1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator:  Employee(s) engaged in operating a Delta radial arm saw in the hang out area located at 15248 Broadmoor Street, Overland Park, Kansas were exposed to struck-by hazards due to the saw not self retracting after being pulled forward.

Issued

May 9, 2025

Penalty

Initial $4,020 · Current $0 Reduced

General-duty citation text

29 CFR  1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  Employee(s) engaged in using the dust collector in the Planner Department located at 15248 Broadmoor Street, Overland Park, Kansas were exposed to electrical hazards due to the single pole toggle switch box having a cord and plug that was plugged into a 220 volt receptacle. Conduit boxes being used to plug in shop equipment attached with cord and plug connections.

Issued

May 9, 2025

Penalty

Initial $2,412 · Current $2,412

General-duty citation text

29 CFR  1910.1200(h)(1):  The employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees had not previously been trained about was introduced into their work area:  Employees were exposed to health hazards.  Employees engaged in truck preventative maintenance and using portable outdoor equipment were exposed to health hazards in that the employer had not provided employees with effective information and training on the hazardous chemicals in their workplace.  Hazardous Chemicals used at the workplace include but are not limited to Pro Bond Premium Cannister Adhesive and propane which may cause allergic skin reaction and breathing difficulties.