Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WAUSAU COATED PRODUCTS, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of WAUSAU COATED PRODUCTS, INC. in 7801 STEWART AVENUE, WAUSAU, WI 54401 (NAICS 326112). OSHA activity number 348199613.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Wausau Coated Products, INC. — free Get an email when a new federal OSHA severe-injury report for Wausau Coated Products, INC. is published. One employer, no account, unsubscribe in one click.
Site address
7801 STEWART AVENUE
City
WAUSAU
State
WI
ZIP
54401
Mailing
7801 STEWART AVENUE, WAUSAU, WI 54401
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326112
Employees
230
Ownership type
A

3 citations on file for this inspection.

1910.147 C06 I

Serious Gravity 10 1 instance 6 exposed
Issued
Jul 18, 2025
Abate by
Aug 22, 2025
Penalty
Initial $14,895 · Current $8,937 Reduced
29 CFR  1910.147(c)(6)(i):  The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.  On or about April 17, 2025, at an establishment located at 7801 Stuart Avenue, Wausau, Wisconsin, in the Coating Department, the employer did not conduct a periodic inspection of their energy control procedures to ensure that the procedures and the requirements of this standard were followed. Employees performed servicing and maintenance tasks on equipment including but not limited to, Coater Line 9 Head 1 when the last periodic inspection had been performed in June of 2023.
Recent events (2)
  • — I (S) $8937
  • — Z (S) $14895

1910.147 C07 I A

Serious Gravity 10 1 instance 1 exposed
Issued
Jul 18, 2025
Abate by
Aug 22, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(7)(i)(A):  Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.  On or about April 17, 2025, at an establishment located at 7801 Stuart Avenue, Wausau, Wisconsin, in the Coating Department on Coater Line 9, an employee engaged in equipment changeover task on Head 1, was not adequately trained in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control as an authorized employee.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 F01

Serious Gravity 10 1 instance 1 exposed
Issued
Jul 18, 2025
Abate by
Aug 22, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.147(f)(1):  Testing or positioning of machines, equipment or components thereof.  In situations in which lockout or tagout devices must be temporarily removed from the energy isolating device and the machine or equipment energized to test or position the machine, equipment or component thereof, the sequence of actions identified in 1910.174(f)(1)(i)-(v).  On or about April 17, 2025, at an establishment located at 7801 Stuart Avenue, Wausau, Wisconsin, in the Coating Department on Coater Line 9, the employer did not ensure an employee conducting testing and position of Head 1 was protected from machine hazards while ensuring the silicone product was tracking correctly on rotating rollers.  An employee entered the hazard area to wipe flaking chips off the rollers and was exposed to a caught-in hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Wausau Coated Products, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348199613.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.