WRIGHT CITY, MO —
OSHA Inspection: QSI, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of QSI, LLC in 28100 HEARTLAND DR., WRIGHT CITY, MO 63390 (NAICS 562998). OSHA activity number 348204694.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QSI, LLC
- Site address
- 28100 HEARTLAND DR.
- City
- WRIGHT CITY
- State
- MO
- ZIP
- 63390
- Mailing
- 412 GEORGIA AVE STE 300, CHATTANOOGA, TN 37403
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562998
- Employees
- 57
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 II B
- Issued
- Sep 11, 2025
- Abate by
- Oct 8, 2025
- Penalty
- Initial $11,823 · Current $7,094 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B):The energy control procedure did not clearly and specifically specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: On or about 4/23/2025, an employee was exposed to hazardous energy while conducting service work on a conveyor belt machine due to moving parts at the American's Heartland Packing facility in Wright City, MO. The employer did not ensure that the energy control procedures clearly and specifically outlined steps for shutting down, isolating, blocking, and securing machines or equipment to control hazardous energy for the conveyor belt machines. Specific energy control procedures did not exist for the following items in the: - Specific steps for shutting down the machines under normal conditions - Specific locations and steps on the machine to isolate energy sources - Specific steps to verify machine has hazardous energy controlled
Recent events (2)
- — I (O) $7093.8
- — Z (S) $11823
1910.147 C04 II C
- Issued
- Sep 11, 2025
- Abate by
- Oct 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them. On or about 4/23/2025, an employee was exposed to hazardous energy while conducting service work on a conveyor belt machine due to moving parts at the American's Heartland Packing facility in Wright City, MO. The employer did not ensure that the energy control procedures clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 C04 II D
- Issued
- Sep 11, 2025
- Abate by
- Oct 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(D): The energy control procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control On or about 4/23/2025, an employee was exposed to hazardous energy while conducting service work on a conveyor belt machine due to moving parts at the American's Heartland Packing facility in Wright City, MO. The employer did not ensure that the energy control procedures clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 D03
- Issued
- Sep 11, 2025
- Penalty
- Initial $16,550 · Current $9,930 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): On or about 4/23/2025, an employee was exposed to hazardous energy while conducting service work on a conveyor belt machine due to moving parts. The employer did not ensure employees took the steps necessary to control the hazardous energy and isolate the machine prior to preforming cleaning of the machine.
Recent events (2)
- — I (S) $9930
- — Z (S) $16550
More inspections at QSI, LLC
View QSI, LLC's full OSHA safety record →
More inspections in this industry (NAICS 562998)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348204694.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.