BILLINGS, MT —
OSHA Inspection: ARCHITECTURAL DOORS AND HARDWARE LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ARCHITECTURAL DOORS AND HARDWARE LLC in 650 CENTRAL AVENUE, BILLINGS, MT 59102 (NAICS 321911). OSHA activity number 348235276.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARCHITECTURAL DOORS AND HARDWARE LLC
- Site address
- 650 CENTRAL AVENUE
- City
- BILLINGS
- State
- MT
- ZIP
- 59102
- Mailing
- 650 CENTRAL AVENUE, BILLINGS, MT 59102
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 4
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 A04
- Issued
- Aug 26, 2025
- Penalty
- Initial $1,702 · Current $1,021 Reduced
General-duty citation text
29 CFR 1910.178(a)(4):Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: a. Shop: On or about May 7, 2025, and at times prior, Employees were exposed to struck by hazards while operating the Toyota Forklift Truck Model # 42-6FGU25 Serial # 66098 to move material throughout the shop. The forklift had an unapproved hole in the fork.
Recent events (2)
- — I (S) $1021.2
- — Z (S) $1702
1910.178 L04 III
- Issued
- Aug 26, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a. Shop: On or about May 7, 2025, and at times prior, employees were exposed to struck by hazards while moving materials and finished product throughout the shop with the Toyota Forklift Truck Model # 42-6FGU25 Serial # 66098. The employer failed to ensure that the operators of the forklifts being utilized throughout the facility were retrained every 3 years.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Aug 26, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7):Industrial trucks were not examined before being placed in service: a. Shop: On or about May 7, 2025, and at times prior, employees were exposed to struck by hazards while operating the Toyota Forklift Truck Model # 42-6FGCUI5 Serial # 67357 with a worn down fork to move materials and finished product throughout the shop.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Aug 26, 2025
- Abate by
- Sep 22, 2025
- Penalty
- Initial $1,702 · Current $1,021 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. Shop: On or about May 7, 2025, and at times prior, employees were exposed to caught in hazards from the rotating chuck of the unguarded RIDGID drill press while drilling holes into metal.
Recent events (2)
- — I (S) $1021.2
- — Z (S) $1702
1910.213 E01
- Issued
- Aug 26, 2025
- Abate by
- Sep 22, 2025
- Penalty
- Initial $2,838 · Current $1,703 Reduced
General-duty citation text
29 CFR 1910.213(e)(1):Each circular resaw was not guarded by a hood or shield of metal above the saw: a. Shop: On or about May 7, 2025, and at times prior, employees were exposed to amputation hazards while cutting particle board on an unguarded Delta Unisaw.
Recent events (2)
- — I (S) $1702.8
- — Z (S) $2838
1910.303 G01
- Issued
- Aug 26, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a. Shop: On or about May 7, 2025, and at times prior, employees were unable to deenergize equipment in the event of emergency due to a boxes blocking the south electrical panel. b. Shop: On or about May 7, 2025, and at times prior, employees were unable to deenergize equipment in the event of emergency due to a boxes blocking the north electrical panel.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Architectural Doors and Hardware LLC
View Architectural Doors and Hardware LLC's full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348235276.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.