Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RONGXING, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RONGXING, LLC in GILIH ST SAN JOSE BEACH ROAD, SAIPAN, MP 96950 (NAICS 453998). OSHA activity number 348249988.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rongxing, LLC — free Get an email when a new federal OSHA severe-injury report for Rongxing, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
RONGXING, LLC
Site address
GILIH ST SAN JOSE BEACH ROAD
City
SAIPAN
State
MP
ZIP
96950
Mailing
P.O. BOX 5055677, SAIPAN, MP 96950
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
453998
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.1053 B16

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 16, 2025
Abate by
Jun 27, 2025
Penalty
Initial $2,128 · Current $2,128
29 CFR  1926.1053(b)(16): Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identifies them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired.  New Downtown Market, Second Floor, at raised platform: The ladder used to access a 5 foot platform to build masonry walls was half of an A-frame ladder and was missing a rung.  Employees were exposed to fall hazards.
Recent events (1)
  • — Z (S) $2128

1910.1200 G08

Other-than-serious 1 instance 3 exposed
Issued
Jun 16, 2025
Abate by
Jun 27, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(g)(8):  The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical  At the New Downtown Market Building, Second Floor: Employees were mixing and using TPI Brand Portland Cement and there was no safety data sheet available onsite.  Employees were exposed to chemical hazards.
Recent events (1)
  • — Z (O) $0

1926.95 A

Other-than-serious 1 instance 3 exposed
Issued
Jun 16, 2025
Abate by
Jun 27, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided:  Second floor, building interior CMU walls: Employees were mixing cement in a concrete mixer, then transferring the cement to a wheel barrow, then applying Portland Cement mixed with water with their bare hands and hand tools.  Employees were exposed to chemical hazards.
Recent events (1)
  • — Z (O) $0

1926.303 C03

Other-than-serious 1 instance 1 exposed
Issued
Jun 16, 2025
Abate by
Jun 27, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.303(c)(3): Portable abrasive wheel(s) used for external grinding were not provided with safety guards (protection hoods):  Onsite at the second floor CMU interior wall construction: An employee was using a portable hand grinder that had no guard to cut CMU blocks.  Employees were exposed to lacceration hazards.
Recent events (1)
  • — Z (O) $0

1926.405 G02 III

Other-than-serious 1 instance 1 exposed
Issued
Jun 16, 2025
Abate by
Jun 27, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.405(g)(2)(iii): Flexible cords were not used in continuous lengths without splice or tap:    Onsite at second level under construction: An employee was using a Makita circular saw that was plugged into an extension cord that had an outlet box spliced to the end of the cord.  Employees were exposed to electrical hazards.
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348249988.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.