ELMIRA, NY —
OSHA Inspection: HARDINGE INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HARDINGE INC. in 1 HARDINGE DRIVE, ELMIRA, NY 14903 (NAICS 332710). OSHA activity number 348342221.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARDINGE INC.
- Site address
- 1 HARDINGE DRIVE
- City
- ELMIRA
- State
- NY
- ZIP
- 14903
- Mailing
- ONE HARDINGE DRIVE, ELMIRA, NY 14902
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 196
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C06 I
- Issued
- Nov 21, 2025
- Penalty
- Initial $6,384 · Current $3,830 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about 06/24/2025 at the site located at One Hardinge Drive, Elmira, NY: The employer did not perform a periodic inspection of the energy control procedures at least annually to ensure the procedures were being followed.
Recent events (2)
- — I (S) $3830.4
- — Z (S) $6384
1910.212 A01
- Issued
- Nov 21, 2025
- Abate by
- Mar 2, 2026
- Penalty
- Initial $14,895 · Current $8,937 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 06/24/2025 at the site located at One Hardinge Drive, Elmira, NY: Employees exposed to caught in hazard from rotating parts on the Jones and Shipman 1300X Grinders. b) On or about 06/24/2025 at the site located at One Hardinge Drive, Elmira, NY: Employees exposed to caught in hazard from rotating parts on the Lathes including but not limited to the 2946- HLV Lathe Serial # M13571-T and 1826-Hardinge HC Lathe Serial # HC-4889-T. c) On or about 06/24/2025 at the site located at One Hardinge Drive, Elmira, NY: Employees exposed to caught in hazards from rotating parts on the drill presses including but not limited to the 785-Allen Drill Press #2MS-6 serial # 29350 and the 3081 Atlas Drill Press 30548. d) On or about 06/24/2025 at the site located at One Hardinge Drive, Elmira, NY: Employees exposed to caught in hazards from rotating part on the Grinding Machines including but not limited to the 7-Capital Grinder and the 413- Capital Grinder.
Recent events (2)
- — I (S) $8937
- — Z (S) $14895
More inspections at Hardinge INC.
View Hardinge INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348342221.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.