Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FABARC STEEL SUPPLY, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of FABARC STEEL SUPPLY, INC. in 111 MEADOW LANE, OXFORD, AL 36203 (NAICS 332312). OSHA activity number 348355330.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Fabarc Steel Supply, INC. — free Get an email when a new federal OSHA severe-injury report for Fabarc Steel Supply, INC. is published. One employer, no account, unsubscribe in one click.
Site address
111 MEADOW LANE
City
OXFORD
State
AL
ZIP
36203
Mailing
P.O. BOX 7280, OXFORD, AL 36203
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
300
Ownership type
A

3 citations on file for this inspection.

1910.22 A03

Other-than-serious Gravity 10 1 instance 10 exposed
Issued
Dec 30, 2025
Abate by
Mar 2, 2026
Penalty
Initial $16,550 · Current $16,550
29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards.  (a) On or about July 3, 2025, in the West Shop building; the employer failed to ensure employees were warned when hazards existed on and around walking working surfaces due to the movement of materials.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (O) $16550
  • — Z (S) $16550

5(a)(1)

Serious Gravity 10 1 instance 26 exposed
Issued
Dec 30, 2025
Abate by
Mar 2, 2026
Penalty
Initial $16,550 · Current $16,550
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees.  (a) On or about July 3, 2025, in the West Shop, Bay #6; the employer failed to ensure that alloy steel chain slings did not contact steel beam obstacles while performing unrigging load procedures.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $16550
  • — Z (S) $16550

1910.184 C07

Deleted Serious Gravity 10 1 instance 26 exposed
Issued
Dec 30, 2025
Abate by
Feb 4, 2026
Penalty
Initial $16,550 · Current $0 Reduced
29 CFR  1910.184(c)(7): Sling(s) were not padded or protected from sharp edges of their loads:  (a) On or about July 3, 2025, in the West Shop building; employees operated overhead gantry cranes with alloy steel chain sling attachments to roll and transport fabricated steel materials without padding or protecting the chains from sharp edges inside the building.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $16550

View Fabarc Steel Supply, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348355330.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.